QSC SPA2-200 2 Channel Energy Star Power Amplifier 200 Watts Rackmount

QSC SPA2-200 2 Channel Energy Star Power Amplifier 200 Watts Rackmount

QSC SPA2-200 2-Channel Power Amplifier is an advanced Class-D amplifier with Energy Star rated efficiency well suited for smaller installations including meeting rooms or BGM zones. The convection cooled amplifier is designed to conserve energy. An auto-ramp circuit ensures quiet and fast power up from standby when a signal is present and seamless power-down following 25 minutes of inactivity, dramatically reducing power consumption.

The rear panel utilizes Euroblock connectors for inputs and outputs as well as remote inputs. Each channel of the SPA2 provides 200W of power, while the bridge mode provides 400W into 4 or 8 ohms and 350W into 70/100V.

For higher power the SPA2-200 two channel amplifier delivers up to 200 watts rms per channel into 4 or 8 ohms; the two channels can also be bridged providing up to 400 watts rms into 4 or 8 ohms. When the channels are bridged they can be switched into 70V or 100V direct drive mode providing up to 350 watts rms into a mono 70V or 100V output. Like the other SPA models, an 80Hz highpass filter is engaged when in 70V or 100V mode.

Features:
Up to 200 watts per channel into 4 and 8 ohms: the outputs of the SPA2-200 model are designed to provide up to 200 watts per channel into Low-Z loads.
ENERGY STAR® qualified amplifier: The ENERGY STAR qualified SPA amplifiers employ an efficient class-D design to conserve energy and reduce operational cost.
Bridgeable outputs for higher power: Bridging the outputs of the SPA2-200 will deliver up to 350 watts into 70V or 100V when bridged.
Auto-Ramp provides quiet startup and power-down: The ENERGY STAR auto-ramp circuitry ensures quiet and fast power up from standby and seamless power: down following 25 minutes of inactivity, dramatically reducing power consumption.
Rack-mountable 1U, half rack width enclosure: The SPA amplifers can be mounted in 1 RU, 1/2 rack space, and their clever joining brackets enable easy under-table and wall-mounting

Features:
Channels 2 4 2 4
Stereo Mode (all channels driven)
8 Ω: 200 W
4 Ω: 200 W
Bridged Outputs (all channels driven)
8 Ω & 4 Ω: 400 W
70 V: 350 W
100 V:350 W
Frequency response (4 Ω and 8 Ω): 20 Hz - 20 KHz +/- 0.1 dB
Signal to noise (20 Hz - 20 KHz): >100 dB
Input sensitivity: 1.23 V (+4 dBu)
Gain at 8 Ω: 25.0 dB
Output circuitry: Class D
Input impedance: >10k, balanced or unbalanced
Maximum input level: 12.3 V (+24 dBu)
Cooling: Convection
Input connectors: 3.5 mm Euro, 5 position (green) 3.5 mm Euro, 10 position (green)
Remote connectors: 3.5 mm Euro, 5 position (black) 3.5 mm Euro, 10 position (black)
Output connectors: 5 mm Euro, 4 position (green)
Front panel indicators: Power, per channel Signal, per channel Protect/Limit
Rear panel indicators: Bi-Color LED Signal/Protect/Limit per channel
Controls: 4 Ω/8 Ω/70 V Bridged Highpass On/100 V Bridged Highpass (per channel pair)
General purpose inputs: Remote volume, remote standby, on 3.5 mm connectors (10k potentiometer is not included)
Highpass filter: 80 Hz in Bridged 70 V & 100 V
Dimensions: 1.7” x 8.7” x 9.5” (43 mm x 220 mm x 241 mm)
Net weight: 3.5 lb (1.1 kg) 4.0 lb (1.4 kg)
Shipping weight: 6 lb (2.3 kg) 6.5 lb (2.5 kg)
Power requirements: Universal Power Supply 100 - 240 VAC, 50 - 60 Hz with active power factor correction
Agency approvals: UL, CE, Energy Star, RoHS/WEEE compliant, FCC Class B (Conducted and Radiated emissions), UL 2043 with plenum kit accessory
Carton contents: IEC Cable, quick start guide, connector pack, rack mount ears, mounting brackets