One Systems 112.HTH-BLACK 12" Two Way Direct Weather Loudspeaker System 3200 W

One Systems 112.HTH-BLACK 12" Two Way Direct Weather Loudspeaker System 3200 W

The 112.HTH provides highly intelligible vocals, extended low-frequency response and high output capability from a reasonably-sized direct weather capable system. The 112.HTH can be used anywhere outdoors thanks to its combination of 316 marine stainless steel suspension hardware and enclosure reinforcements, HYBRID stainless steel grille with marine capable coating and tough UV-resistant enclosure. The 112.HTH comes with a large-sized, rotatable 60 x 40-degree horn installed, but a rotatable 105 x 60-degree for wide coverage applications is also available with order. The 112.HTH can be powered as a low impedance system (800 watts continuous, 3,200 watts peak at 8 ohms) or as a high impedance system (70.7 – 100 volts with taps at 150 watts, 75 watts and 37.5 watts). The 112.HTH delivers top-class performance, impressive flexibility and long useful life. Its highly defined audio performance and output capability make it a solution for indoor or outdoor audio applications.

The 112HTH is optimized for outdoor short throw to medium throw applications such as theme parks, parade routes, baseball and football stadiums, and other entertainment/sports venues where permanent installation is required. The 112HTH is an extremely versatile design that offers high performance in a small physical package. The 12-inch woofer offers substantial extended low frequency output.

The 112HTH is a two-way design that features rotatable and interchangeable high frequency horns. The 112HTH has a rotatable 60 x 40 degree horn installed. A wide coverage pattern 105 x 60 horn may be ordered through One systems that is also fully rotatable. The medium Q, 60 x 40 pattern is ideal for medium throw applications and where venue or space acoustics require a tighter high frequency pattern. The 105 x 60 high frequency wave guide is an optional accessory that provides broad dispersion and controlled coverage. The 12-inch nominal diameter low frequency component features a very large voice coil diameter and insures high reliability and excellent linearity.
The One Systems 112HTH features 15 each M10 rigging points. These rigging points may be used with the One Systems PT76/M pan and tilt system or the PM4/M pole mount system rigging brackets. The PT76/M is used for flat surface mounting. An optional U-bracket, the 112HTH-U/M, is also available as an accessory. The enclosure is an injection molded design that utilizes a high-impact copolymer material that exhibits superior weather resistance. The 112HTH is available in either black or white color. Both color options are stabilized for ultra violet exposure. The design also features a three-layer “rain shield” grille, as well as an input weather cover with a waterproof gland nut. The system ingress protection in normal mode is IP 45. When the vent plugs are installed the ingress protection is IP 56.

Features:

• Marine-grade (316) stainless steel rigging and structural support
  
• Easily configurable Hi Z (150 watt) multi tap or Lo Z (8 ohm) operation
  
• Combined 70.7Vrms or 100Vrms operation
  
• Rotatable High frequency horns
  
• ET-60/40 horn supplied and ET-105/60 horn available
  
• No performance degrading or dynamics limiting passive protection devices
  
• 800 watts continuous, 3200 watts peak power handling in Lo Z mode
  
• IEC 529 IP 45 ingress protection (IP 56 when vent plugs are installed)

Specifications:
Frequency Response: 60Hz – 16,000Hz
Coverage Pattern:
ET-60/40, 60 x 40 degrees
ET-105/60, 105 x 60 degrees
Crossover Frequency:
1,300 Hz (rotatable 105 x 60)
1,800 hz (rotatable 60 x 40)
System Sensitivity (1 Watt / 1 Meter): 96dB
Power Handling:
800 watts continuous
1600 watts program
3200 watts peak
Input Impedance (Lo Z): 8-ohms
Input Taps (Hi Z): 150 watts, 75 watts, 37.5 watts
Weight: 35.3kg (77.8 lb.)
Dimensions (H x W x D) mm: 749 x 368 x 414
Dimensions (H x W x D) in: 29.5 x 14.5 x 16.3