Symetrix XIN4 Audio Input Expander for Symetrix Systems 4 Mic or Line Level

Symetrix XIN4 Audio Input Expander for Symetrix Systems 4 Mic or Line Level

The cost effective xIn 4 increases a system’s analog input channel capacity resulting in a reduction in overall price per channel. Designed exclusively for use with Dante-enabled Symetrix DSP units, each of the four analog inputs’ parameters (5 gain levels, phantom power), along with bus assignments, are configured using Symetrix Composer open architecture software. xIn 4 set up is logical and fast with no requirement

to use third-party software; there are no mechanical switches or circuit board jumpers to set. Systems are simpler, cost less, and have fewer potential points of failure. A half-rack form factor conserves rack space. Optional 1U rack tray and 1/2U surface mount bracket are available for separate purchase.

Features:
• Flexible Fixed Architecture DSP with 85 preconfigured apps
• 4 mic/line inputs
• 4 line outputs
• High Performance Symetrix preamps4x4 GPIO
• ARC Remote Port
• Ethernet port for programming with Jupiter software for Windows
• Embedded web server provides remote metering, diagnostics and configurable ARC-WEB browser control
• Flexible user control via ARC remotes, ARC-WEB, TCP/UDP
• Dedicated front panel LEDs display audio levels and system status
• External Power Supply

Specifications:

Analog Inputs:

• Frequency Response: 20 Hz – 20 kHz, ± 0.5 dB.
• Channel Separation: > 111 dB @ 1 kHz, +24 dBu.
• Connectors: 3.5 mm Phoenix® connectors.
• Number of Inputs: Four (4) switchable balanced mic or line level.
• Nominal Input Level: +4 dBu with 20 dB of headroom.
• Maximum Input Level: +23 dBu.
• Mic Pre-amp Gain: 0, 11.8, 24, 44, or 54 dB switchable.
• Mic Pre-amp EIN: < -127 dB with 150 ohm source impedance.
• CMRR: > 76 dB @ 1 kHz, unity gain.
• Input Impedance: 8k Ohms balanced, 4k Ohms unbalanced.
• Phantom Power (per input): +48 VDC @ 10 mA maximum.
• Dynamic Range: > 116 dB, A-weighted.
• THD + Noise: < -100 dB, unweighted; 1 kHz @ +22 dBu with 0 dB gain.
• Latency: 0.28 mS.

System:

• Sampling Rate: 48 kHz, ± 100 ppm.
• Dante Cable: Standard CAT6, maximum device-to-device length = 100 meters.