Skip to main content
Symetrix PRISM 8X8 Digital Signal Processor w/Dante Channel for Audio Networking

Symetrix PRISM 8X8 Digital Signal Processor w/Dante Channel for Audio Networking

Symetrix

$2,791.00
(No reviews yet) Write a Review
SKU:
190473
UPC:
Does not apply
Shipping:
Free Shipping
Adding to cart… The item has been added
Symetrix PRISM 8X8 Digital Signal Processor w/Dante Channel for Audio Networking

Ships Free!

Flexible IO Combinations. The prism family scales from the smallest 4×4 to the largest 16×16, providing the perfect amount of class leading Symetrix quality IO for any installation.

Dante in Our DNA.  Prism DSPs are equipped with optional factory installed 128 (64×64) Dante channels. The Dante protocol enables ultra-reliable multi-channel audio networking over IP. Together, Symetrix and Dante provide the fastest possible way to implement, control, and maintain a system of networked DSPs and accessories – including third party Dante-enabled microphones, loudspeakers, power amps, and mixing consoles. Models without Dante provide even more accessible DSP pricing for smaller systems.

Scaling Up.  A Prism system’s analog input and output count may be increased using Symetrix Dante-enabled xIn 4, xIO 4×4, xOut 4, xIn 12, and xOut 12 analog I/O expanders.

Unlimited Programming Flexibility.  Prism is programmed using Composer – Symetrix’ award winning open-architecture CAD application. Unique to Composer is the ability to natively configure Symetrix and select third party

Control Made Easy.  Multiple control options include low-cost Symetrix ARC wall panels and an easy to generate SymVue Windows virtual GUI. The human readable Composer Control Protocol supports programming of third-party touch screens and control devices.

An Embedded Web Server for Status and Even More Control.  Prism’s embedded web server displays I/O levels, diagnostics data, and hosts ARC-WEB – a browser-based interface for smart phones, tablets, and computers.

Form, Fit and Function.  Prism 8×8 have been designed using standard 19” x 1U enclosures. For convenient point-of-use or rack mounting.

Specifications

Analog Inputs

Number of Inputs: Four (4) switchable balanced mic or line level.
Connectors: 3.81 mm terminal blocks.
Nominal Input Level: +4 dBu.
Maximum Input Level: +23 dBu.
Mic Pre-amp gain: 0, 12, 24, 44 or 54 dB switchable with ± 24 dB trim.
Mic Pre-amp EIN: < -125dB with 150 ohm source impedance. 22.4 kHz BW.
CMRR: > 79 dB 1 kHz, unity gain.
Input impedance: 8k Ohms balanced, 4k Ohms unbalanced.
Phantom power (per input): +48 VDC, 10 mA maximum.
Dynamic range: > 113 dB, A-weighted.
THD+Noise: < -100 dB; 22.4 kHz BW, unweighted; 1 kHz  +15 dBu with 0 dB gain. Course gain is set to +4dBu.
A to D Latency: 0.28 mS.

Analog Outputs

Number of Outputs: Four (4) balanced line level.
Connectors: 3.81 mm terminal blocks.
Nominal Output Level: +4 dBu with 20 dB of headroom.
Maximum Output Level: +24 dBu (+22.8 dBu into a 2k Ohm minimum load).
Output Impedance: 300 Ohms balanced, 150 Ohms unbalanced.
Dynamic Range: > 117 dB, A-weighted.
THD+Noise: < -97 dB; 22.4 kHz BW, unweighted; 1 kHz, 0 dB gain +8dBu output.
D to A Latency: 0.60 mS.

System
Sampling Rate: 48 kHz.
Frequency Response (A/D/A): 20 Hz – 20 kHz, ± 0.5 dB.
Dynamic Range (A/D/A): > 113 dB, A-weighted.
Channel Separation (A/D/A): > 110 dB 1 kHz, +24 dBu.
THD+Noise: <-95 dB (22.4 kHz BW, un-weighted); 1 kHz +15 dBu with 0 dB gain.
Latency (A/D/A): 1.04 mS, inputs routed to outputs.
Processors: 1 x Analog Devices SHARC 21489 400 MHz SIMD.
Raw Processing Capacity: 400 MIPS, 1.6 GFLOPS.
Delay Memory: 174 mono seconds.
Analog control inputs: 0-3.3 VDC.
Recommended External Control Potentiometer: 10k Ohm, linear.
Logic Outputs: Low (0V) when active, pulled high (5V) when inactive.
Logic Output Maximum External Power Supply Voltage: 24 VDC.
Logic Output Maximum External Power Supply Current Sinking: 50 mA.
Logic Output Maximum Output Current: 10 mA.
RS-485 Serial I/O: 38.4 kbaud (default) 8 data bits, 1 stop bit, no parity, no flow control. May be broken out of ARC port.
Ethernet Cable: Standard CAT5e or CAT6, maximum device-to-device length = 100 meters.
Dante Cable: Standard CAT6, maximum device-to-device length = 100 meters.
ARC Cable: Standard CAT5, distance dependent upon load and number of devices. 8 Watts maximum power available.
Maximum Devices Per System: 80 units per Site File.
Maximum Stored Presets: 1000.
© 2024 Echotone Music LLC All Rights Reserved. Any use of any material content, images, or design, without prior written consent from echotonemusic.net, is strictly prohibited by law.
!