Sonance PS-S210SUBT Outdoor Subwoofer Speaker

Sonance PS-S210SUBT In-Ground Outdoor Subwoofer Powerful Landscape Bass

The PS-S210SUBT utilizes all-new 2 x 10” (254mm) low profile, high excursion drivers, that were specifically engineered in-house by Sonance for this product. The polyurethane-coated, laminated-plywood enclosure features an extremely shallow design which allows it to be used in a wide range of specialty applications such as under restaurant booths or banquettes (using the included feet), or mounted onto the side of rafters, on walls or under ceilings (with the optional C-bracket).

One of the most unique and versatile features of the PS-S210SUBT is the ability to port either from the front or the side of the enclosure. The installer simply unscrews the port from the front of the cabinet, and then unscrews a blanking plate from the side, and swaps them. This will allow the product to be used in a variety of installation locations, while always ensuring the optimum sonic performance is achieved. The PS-S210SUBT features Sonance’s Laminated Core Technology transformer (SLCT), delivering full-fidelity performance in either 70V or 100V mode. This, combined with the built-in low pass filter, allows the subwoofer to be driven on the same feed as the other full-range loudspeakers in a system, negating the need for additional amplifier channels and DSP.

Features

• The PS-S210SUBT utilizes dual 10” drivers in a band pass design for exceptional bass augmentation across all volume levels.
• Low profile dual 10" subwoofer form-factor to go under banquets, booths, furniture with supplied feet
• Optional C-Bracket for mounting on rafters, walls or ceilings for mounted subwoofer, or in-ceiling, pendant, or surface mounted for woofer options
• Port can be moved from front to side, ensuring optimum sonic performance in any location
• Sonance Laminated Core Transformer (SLCT) for full-fidelity performance in 70V/100V
• Built-in low pass filter allows the product to run on the same amplifier channel as other speakers
• Removable grille to keep enclosure free of foreign objects
• Side connector cover with cable management for enhanced reliability

Frequency Range (-10dB)

34Hz - 155Hz

Frequency Range (-3dB)

44Hz - 132 Hz

Power Capacity

500 Watts Continuous Program Power | 300 Watts Pink Noise

Nominal Sensitivity

94dB

Nominal Coverage

180 degrees conical coverage

Directivity Factor (Q)

N/A

Directivity DI

N/A

Rated Maximum SPL

121dB @ 1 meter (3.3 feet), 127dB peak

Rated Impedance

4 Ohms nominal, 3.7 Ohms minimum

Transformer Taps

300W, 150W, (75W 70V)

Crossover Point

150Hz

Overall Dimension

9" Height x 33" Width x 13.78" Depth (228mmx 838mm x 350mm)

Net Weight

61 lbs (27.7kgs)

Shipping Weight

75.8lbs (33 kgs)

Unit of Measure

Each

LF Driver

Dual 10" (254mm) woven glass fiber cones with Butyl rubber surrounds

Input Connector

Four pin, Euroblock with loop output connections

Safety Agency

None

Suspension Points

4 x M10 on two sides

Cabinet

Laminated plywood

Optional Accessory

C-Bracket with 4 x M10 mounting bolts