QSC AD-S10T-WH Two Way 10 Inch Surface Mount Loudspeaker System 250 Watts

QSC AD-S10T-WH Two Way 10 Inch Surface Mount Loudspeaker System 250 Watts

QSC’s AcousticDesign™ S10T surface mount loudspeakers are professional, 70/100V, 10-inch, two-way, full-range systems ideal for a wide variety of foreground and background sound reinforcement applications. Ease-of-installation is the driving principle behind QSC’s next generation of small format, surface mount loudspeakers. Innovations found on AD-S loudspeakers enable designers and integrators to quickly and easily specify and install a system. AD-S loudspeakers are also a perfect solution to serve ancillary loudspeaker needs as part of a larger installed sound system.

Housed in rugged ABS enclosures for long-term durability, S10T loudspeakers employ DMT™ (Directivity Matched Transition) which matches the LF and HF coverage at the crossover point. This ensures even coverage across the listening plane for smooth, coherent audio reproduction. The 1.4in diaphragm, 1-in exit compression driver on the S10T delivers crisp, detailed high-frequency reproduction and when combined with the matched woofers, provides full bandwidth reproduction. To further enhance performance, tunings using QSC Intrinsic Correction techniques are available for Q-Sys and future QSC amplifiers. Moreover, the low saturation transformers offer premium performance on 70/100V distributed audio lines.

Installers will appreciate flexible mounting options. Euroblock connectors allow pre-wiring of the system and the included

X-Mount hardware enables the installer to mount the bracket and then simply lift the loudspeaker onto the mount and lock it into place. Moreover, the loudspeaker can attach to its mount on any plane to facilitate multiple deployment configurations.

AD-S loudspeakers can easily be mounted to any weight bearing, flat surface. Knurled surfaces on the mount’s pivot points ensure that the loudspeaker deployment angle stays fixed and will not slip over time. No special tools are required to install or adjust the loudspeaker angle. S10T models also feature M10 installation points for suspending the loudspeaker via eye-bolts as well as mounting points for an optional yoke bracket.

Features:
DMT™ (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage area
Patent pending X-Mount™ enables the loudspeaker to be easily installed and deployed at a variety of angles without slipping over time
Optional yoke mount and M10 Kit-C eyebolt kit offers additional loudspeaker deployment options
Euroblock connectors allows pre-wiring of the system
Low saturation 70/100V transformer with 8 ohm bypass
Lightweight ABS enclosures offer long-term durability and lasting good looks
Sealed input panel cover and powder coated aluminum grilles for added weather resistance
Meets IEC60529 IP-54 for dust and splash resistance
Complete EASE, CAD & BIM information available online
Can also be used as a Cinema surround loudspeaker

Specifications:
Effective frequency range: 1 50 Hz – 19 kHz
Rated noise power / voltage2: 250 watts / 45 volts (rms)
Broad-band sensitivity3: 92 dB SPL
Coverage angle (-6 dB): 90°
Directivity factor (Q): 10
Directivity Index: 10 dB
Maximum continuous SPL4: 116 dB
Maximum peak SPL4: 122 dB
Rated impedance: 8 ohms
Recommended amplifier: 500 watts
Transformer taps:
70 V: 100, 50, 25, 12.5 watts and 8 ohm bypass
100V: 100, 50, 25 watts and 8 ohm bypass
HF transducer: 1” exit / 1.4” voice-coil compression driver
LF transducer: 10” weather resistant paper cone woofer, 2.5” / 64 mm voice-coil
Input connector type: Euroblock connector with parallel output
Enclosure material: Painted ABS polymer
Grille material: Powder coated aluminum
X-Mount material: Powder coated aluminum
Enclosure Details
Ingress protection: IP-54
Operating environment: Designed for indoor and outdoor use
Testing: The AD Series loudspeakers qualified for outdoor use using the following tests:
Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.
Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days
High and low temperature: tested to QSC internal standards between -20° and 50° C
Operating Temperature Range: -20 to 50° C / -4 to 122° F
Net weight: 31 lb / 15 kg
Product dimensions: 20.3” x 12.5” x 11.7” (516 x 318 x 298 mm)
Shipping weight: 40.6 lb / 18.45 kg
Shipping dimensions: 31.7” x 16.1” X 16.1” (805 x 409 x 409 mm)
Included accessories: X-Mount mounting system, euroblock connector, input panel cover
Optional accessories: YMS10T yoke mount, M10 Kit-C