QSC AD-C6T-WH 6.5 Inch Two Way Surface Ceiling Mount Loudspeaker 60 Watts

QSC AD-C6T-WH 6.5 Inch Two Way Surface Ceiling Mount Loudspeaker 60 Watts

The QSC AcousticDesign™ AD-C6T is a 6.5" two-way ceiling loudspeaker ideally suited for a wide variety of foreground and background sound reinforcement applications which utilize 70/100V or 16Ω bypass configurations.

The AcousticDesign™ Series offers integrators a premium quality installed sound solution where performance, consistent coverage, and aesthetics are paramount. Specifically designed to maintain a consistent tonal characteristic across the entire family in ceiling, surface, and pendant applications, the AcousticDesign series allows integrators seamless transitions within blended installations.

The AD-C6T features a high quality 6.5" weather treated paper cone woofer with a 1" voice coil and a .75" aluminum dome tweeter which is positioned on a DMT waveguide.

DMT (Directivity Matched Transition™) is QSC’s design philosophy where the high frequency waveguide is matched to the natural conical behavior of the woofer at the crossover point. The result is a coherent
transition between transducers with improved off-axis power response for consistent 135° conical DMT coverage.

The accurate frequency response of the AD-C6T is maintained even in 70/100V applications by use of a low-loss, lowsaturation 60-watt transformer with selectable taps, including 16Ω bypass, using a rotary selector located under the snap-fit magnetically attached powder coat steel grille.

To retain lasting good looks, the rugged ABS baffle is further protected by using UV inhibitors that prevent discoloration and by a powder coated steel back can. The magnetic grille features a stick-on logo that can be removed blemish-free for installations where branding is not permitted.

Installers will appreciate the 3x double stepped, long travel dog-ear blind mounting system, which captures from 0" - 2.25" of ceiling thickness. The conduit cover plate can be easily removed by losening the single captive Phillips screw allowing access to the locking 4-pole Euro-block connector which can accept up to four 18AWG pairs, eliminating the hassles of star topology wiring designs.

Intrinsic Correction™ voicings that optimize performance and speed the install process are easily deployed via the Q-SYS Platforms, including CXD-Q Series amplifiers, as part of a complete QSC systems solution.

The AD-C6T is available in QSC standard black (RAL 9011) or white (RAL 9010) and may be painted to match any decor.

For your system integration needs, complete EASE, CF2, CAD, and BIM files are available for download at QSC.com.

Features:
Consistent tonal characteristics across the entire AcousticDesign family for surface, ceiling, and pendant applications
DMT (Directivity Matched Transition™) waveguide ensures smooth, uniform frequency response over the coverage area
Snap-fit magnetic grille
3x double stepped, long travel dog-ear blind mount system
Intrinsic Correction™ voicings available via Q-SYS Platform including CXD-Q Series amplifiers
Low-saturation and low-loss 70/100V transformers with 16Ω bypass
Blemish-free removable logo
Removable conduit cover plate, also available as accessory for preinstall wiring
UL1480 and UL2043 certified
Available in white (RAL 9010)
Complete EASE, CF2, CAD, & BIM information available online

Specifications:
Effective frequency range 1: 65 Hz – 20 kHz
Rated noise power / voltage 2: 60 watts / 31 volts (rms)
Sensitivity [dB] 3: 88
Sensitivity at 4m, 100V maximum tap: TBD
Rated coverage (-6 dB) 4: 135° conical DMT
One-third octave frequency band contribution at full power using 100V maximum tap at 4m. (Hz / dB):
500 / TBD; 630 / TBD; 800 / TBD
1000 / TBD; 1250 / TBD; 1600 / TBD
2000 / TBD; 2500 / TBD; 3150 / TBD
4000 / TBD
Directivity factor 4: 6.5
Directivity index [dB] 4-: 8
Maximum continuous SPL [dB] 5: 106
Maximum peak SPL [dB] 5: 112
Nominal impedance [ohms]: 16
Recommended amplifier: 120 watts
Transformer taps / impedance:
16Ω (in bypass setting)
7.5W (70V); 15W (100V) Tap: 667Ω
15W (70V); 30W (100V) Tap: 333Ω
30W (70V); 60W (100V) Tap: 167Ω
60W (70V); N/A (100V) Tap: 83Ω
LF transducer: 165 mm [6.5 in] weather treated paper cone woofer
HF transducer: 19 mm [.75 in] aluminum dome tweeter
Input connector type: Euroblock connector with parallel output
Enclosure material: ABS baffle on powder coated steel back can
Grille material: Powder coated steel
Ingress protection: IP-34
Operating environment: Designed for indoor use
Operating temperature range: -20 to 50° C [-4 to 122° F]
Cutout dimension: Ø 245 mm [Ø 9.65 in]
Net weight: 4.3 kg [9.5 lb]
Product dimensions (Diameter x Height): Ø 280 x 237 mm [Ø 11.02 x 9.32 in.]
Shipping dimensions (H x W x D): 330 x 737 x 381 mm [13 x 29 x 15 in] (pair packed)
Included accessories: C-ring and tile rails, rail screws, euroblock connector, cut-out template, tether grille
Optional accessories:
AD-MR6 (pre-install mud ring)
AD-CC6 (pre-install conduit cover)
Safety Agency: EN54-24: 2008 type A (No. pending) UL1480, UL2043, NFPA90, NFPA70 suitable for use in air handling spaces. Transformer UL registered per UL1876, ROHS, C-Tick (pending), CE compliant. Baffle meets UL94-V0 and UL94-5VB flamibility rating; in accordance with IEC60849 / EN60849 systems