Point Source CO2-8WD-XSE-BE Dual Element Headset Microphone

Point Source CO2-8WD-XSE-BE Dual Element Headset Microphone

Our award-winning SERIES8 omnidirectional headsets provide you with absolute confidence in fitting and microphone placement—and now even more so with fully redundant elements that are factory matched and mated into an ultra low-profile tandem form factor. Both elements are IP 57 waterproof rated against water, sweat and makeup; and our super bendable boom on this headset is “Unbreakable” up to 360°. Each microphone accepts two interchangeable X-Connectors for termination to your wireless system.

The headset microphone's patent pending design offers built-in microphone redundancy with the convenience of a single cable. The elements are factory matched to a near identical ±0.5 dB difference—and both elements are IP 57 waterproof rated. The mic elements are offset to reduce mass and effectuate a sleek profile.

Choose the CO2-8WD headset microphone and get the confidence of built-in backup. High performance but low-profile, this dual petite element headset mic is the best headset microphone for theatrical performers, live audio professionals and broadcasters alike.

The mic cable splits approximately nine inches above connection to the body-packs to allow ample room for separation of the transmitters.

Ear hooks fold flat for protection in storage and travel.
Like our original single element headset microphone, the CO2-8WD features the unique ability to reverse for left or right ear wearing to accommodate any mic user or production requirement.

Features:
• 2 MICS IN ONE: Dual matched waterproof elements for built-in redundancy
• "Unbreakable Boom" bends 360°
• 136dB max SPL
• IP 57 waterproof rated
• Interchangeable X-Connectors for all popular wireless packs including Shure, Sennheiser and Audio-Technica
• Mic element only 3mm in diameter
• Optimal gain before feedback
• Available in colors beige, brown or black

Specifications:
• Element: Waterproof Back Electret Condenser (2 Matched)
• Pattern: Omnidirectional
• Frequency: 20Hz - 20kHz
• Sensitivity: -43 dB 1V/Pa (± 3dB at 1kHz)
• Maximum SPL: 136 dB SPL
• Output Impedance: 1400 Ω (at 1kHz)
• Operating Voltage: 1 - 10 V
• Cable Length: 6 ft . + connector
• Net Weight: 0.6 oz
• Colors: Beige, Brown or Black
• Connector Types: TA3F, TA4F, TA5F, lockable 3.5mm, Hirose, Lemo-style, 3.5mm TRRS