Call us we are here to help - Overnight shipping available
Lewitt DTP640REXDual-capsule kick drum microphone
Your mic for double-power kick drum sound.
The DTP 640 REX is a dual-element microphone specifically designed to capture the sound of your drums and percussion instruments. It features two phase-aligned capsules, a condenser and a dynamic one. You can also switch between three sounds for more flexibility in studio and live applications.
Two capsules for the best of your source.
We put two phase-aligned microphones in a single housing. The dynamic side ensures accurate attack reproduction of the kick drum, while the condenser element captures the drum's low end. Each element has a dedicated output.
This enables you to shape the kick drum sound in unique ways.
Cuts a good figure on your drums and bass.
With the DTP 640 REX, you get massive yet clear kick drum and bass recordings, in the studio and on stage.
The capsule is specifically designed to replicate low frequencies with precision and punch.
Hear and feel that kick.
Dynamic =//= Condenser
Both elements with neutral frequency response.
Dynamic +//= Condenser
Dynamic element boosts low frequencies; condenser stays neutral.
Dynamic +//+ Condenser
Dynamic boosts the range of 4-6 kHz, condenser boosts low frequencies.
This mic is built to last.
The DTP 640 REX features a hardened hexagonal ruthenium-galvanized steel mesh grille and a solid die-cast metal body.
Type: Dynamic, moving coil, Condenser, permanently polarized
Acoustical operating principle: Pressure gradient transducer
Transducer Ø: 31.7 mm, 1.25 in
Transducer Ø: 22.4 mm, 0.88 in
Polar pattern: Cardioid
EFR, ‘Enhanced Frequency Response' settings: Sensitivity, = // = FFR: 0.4 mV/Pa (-69 dBV), dynamic
2 mV/Pa (-54 dBV), condenser
Sensitivity, + // = Dynamic EFR: 0.4 mV/Pa, -69 dBV/Pa, dynamic
2 mV/Pa, -54 dBV/Pa, condenser
Sensitivity, + // + Dual EFR: Condenser and dynamic matched at 1 mV/Pa, -60 dBV
Self-noise: 28 dB (A)
Max. SPL for 0.5 % THD: 50 dBSPL, 0 dB attenuation
Dynamic range of mic. amp. (condenser): 122 dB
Pre-attenuation pad:
0 dB
-10 dB
-20 dB
Rated impedance dynamic: 500 Ω
Rated impedance condenser: 200 Ω
Supply voltage: 48 V ± 4 V
Current consumption: 2 mA
Connector: Gold plated 3-pin and 5-pin XLR
Cable; 1.5 m (4.95’) dual shielded Y-cable, 5-pin XLR into two 3-pin XLRs
Microphone dimensions: 71 dia. x 158 mm, 2.8 dia. x 6.2 in
Microphone net weight: 755 g, 27.3 oz
