Lewitt DTP640REX Bass kick Drum Instrument Microphone

Lewitt DTP 640 REX Bass kick Drum Instrument Microphone

Kick drum microphone with two capsules.
DTP 640 REX
Dual-element instrument microphone
Dynamic and condenser capsule in one housing
Separate outputs for both capsules
For kick drum and other bass-heavy sources
Three switchable sound characteristics
Cardioid polar pattern

Included: Audio cable, Transport bag

Your mic for double-power kick drum sound.

The DTP 640 REX is a dual-element microphone specifically designed to capture the sound of your drums and percussion instruments. It features two phase-aligned capsules, a condenser and a dynamic one. You can also switch between three sounds for more flexibility in studio and live applications.

Dual-element kick drum microphone
Two capsules for the best of your source.

We put two phase-aligned microphones in a single housing. The dynamic side ensures accurate attack reproduction of the kick drum, while the condenser element captures the drum's low end. Each element has a dedicated output.

This enables you to shape the kick drum sound in unique ways.

For kick drum and other bass-heavy sources
Cuts a good figure on your drums and bass.

With the DTP 640 REX, you get massive yet clear kick drum and bass recordings, in the studio and on stage.

The capsule is specifically designed to replicate low frequencies with precision and punch.

Three switchable sound characteristics
Hear and feel that kick.

Dynamic =//= Condenser
Both elements with neutral frequency response.

Dynamic +//= Condenser
Dynamic element boosts low frequencies; condenser stays neutral.

Dynamic +//+ Condenser
Dynamic boosts the range of 4-6 kHz, condenser boosts low frequencies.

Sturdy metal housing
This mic is built to last.

The DTP 640 REX features a hardened hexagonal ruthenium-galvanized steel mesh grille and a solid die-cast metal body.

Specifications

Type
Dynamic, moving coil, Condenser, permanently polarized

Acoustical operating principle
Pressure gradient transducer

Transducer Ø
31.7 mm, 1.25 in

Transducer Ø
22.4 mm, 0.88 in

Polar pattern
Cardioid

EFR, ‘Enhanced Frequency Response' settings
Sensitivity, = // = FFR
0.4 mV/Pa (-69 dBV), dynamic
2 mV/Pa (-54 dBV), condenser

Sensitivity, + // = Dynamic EFR
0.4 mV/Pa, -69 dBV/Pa, dynamic
2 mV/Pa, -54 dBV/Pa, condenser

Sensitivity, + // + Dual EFR
Condenser and dynamic matched at 1 mV/Pa, -60 dBV

Self-noise
28 dB (A)

Max. SPL for 0.5 % THD
150 dBSPL, 0 dB attenuation

Dynamic range of mic. amp. (condenser)
122 dB

Pre-attenuation pad
0 dB
-10 dB
-20 dB

Rated impedance dynamic
500 Ω

Rated impedance condenser
200 Ω

Supply voltage
48 V ± 4 V

Current consumption
2 mA

Connector
Gold plated 3-pin and 5-pin XLR

Cable
1.5 m (4.95’) dual shielded Y-cable, 5-pin XLR into two 3-pin XLRs