JBL C29AV-WH-1 Indoor Outdoor Sport Facilities Monitor Surface Mount Loudspeaker
The Control® C29AV-WH-1 provides improved voicing for extremely fl at, high fi delity performance, extended bandwidth and well-controlled defined coverage from a compact loudspeaker.
The rotatable high-frequency horn allows use of the speaker in either vertical or horizontal orientation. Consistent
coverage ensures excellent sound character throughout the listening area. Moderate magnetic shielding allows use
of the speaker as close as 230 mm to video monitors.
The top-quality line distribution transformer, designed for minimal insertion loss and reduced saturation, allows
use of either 70V or 100V distributed speaker lines. In bypass position, the 8Ω impedance allows use of multiple speakers on a loudspeaker line.
Weather resistance has been maximized. The woofer’s cone is made of kevlar, surround is pure butyl rubber, and the driver basket is rear loaded to minimize direct exposure. The compression driver’s diaphragm is pure titanium. The grille is thermoset composite coated and comes with foam to minimize incursion of water. Nickel/zinc rust-resistant terminals ensure a secure input connection.
When providing sound reinforcement for sporting events, the screaming fans are just one of many challenges faced
by the design and installation teams. This design will address the most important factors to deliver optimal audio coverage and high intelligibility to every seat in the house.
JBL’s exclusive SonicGuard overload protection is virtually inaudible to the listener, ensuring reliability while
providing full fi delity sound.
Features:
Extended bandwidth, extremely smooth frequency response.
110° x 85° HF coverage, rotatable horn.
110 W transformer for 70 V or 100 V lines, with 8 ohm thru.
SonicGuard™ overload protection.
200 mm (8 in) Kevlar cone woofer,
25 mm (1 in) titanium diaphragm compression driver.
Includes InvisiBall™ mounting hardware, plus ten 6 mm attachment points for suspension and
optional U-bracket.
Sealed input panel cover and screwdown input terminals.
Specifications:
Frequency Range:37 Hz –18 kHz (-10 dB)
Power Capacity:300 W Continuous Program Power; 150 W Continuous Pink Noise
Overload Protection:Full-range power limiting to protect network and transducers. Serviceable internal fuse to protect during exceptional overload conditions.
Outdoor Capability:
IEC 529 IP-X4 rating. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray.
Input Connectors:Screw-down terminal strip, zinc plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5 mm2).
Safety Agency:Transformer is listed per UL1876
Colors:Black or white (-WH)
Dimensions (H x W x D):520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in.)
Net Weight (each):12.2 kg (26.8 lb.)
Shipping Weight (ea):14.0 kg (30.8 lb.)
Included Accessories:1 pc MTC-PC2 input panel cover, InvisiBall mounting base, 6 mm x 260 mm InvisiBall Hex wrench.
Optional Accessories:MTC-29CM to install speaker down from the ceiling MTC-29UB U-bracket
Mounting Hardware:InvisiBall™ aimable wall-mounting system included. Optional U-bracket.
QSC AC-S6T-WH 6.5 Inch Two Way Passive Surface Mounted Loudspeaker The QSC AcousticCoverage™ AC-S6T is a surface mounted 6.5” two-way loudspeaker with 70/100V transformer, suitable for a wide...
Call us we are here to help - Overnight shipping available
