Skip to main content
JBL AWC82 8" All Weather Compact 2 Way Hanging Business Loudspeaker Music paging

JBL AWC82 8" All Weather Compact 2 Way Hanging Business Loudspeaker Music paging

JBL

$503.00
(No reviews yet) Write a Review
SKU:
114810
UPC:
050036904179
Shipping:
Free Shipping
Adding to cart… The item has been added
JBL AWC82 8" All Weather Compact 2 Way Hanging Business Loudspeaker Music paging

The AWC82 is a compact, coaxial-driver, 2-way, highly weather-resistant full-range loudspeaker system which is ideal for speech and music-fill in a wide variety of applications, including sports facilities, racetracks, stadiums, fairgrounds, rodeos, skating rinks, themed entertainment venues, cruise ships, water parks, outdoor background music/paging systems, swimming pools, and a wide variety of other outdoor or indoor venue types.
The AWC82 is comprised of a high-power coaxial 200 mm (8 in) low frequency driver and 25 mm (1 in) high frequency compression driver. The co-axial design utilizes a unique tapered pole-piece design and transitions to the cone of the low frequency driver as a large diameter pattern control horn for the high frequencies, both eliminating high-frequency beaming which is common among this category of speaker and extending pattern control to the lowest possible frequencies. The result is a coaxial speaker with wide, extremely consistent 120° coverage on a broadband basis.

Component features include a Kevlar-reinforced low frequency cone for reliability, well-damped surround for smooth frequency response, high temperature voice coil and a reduced distortion design through saturated-gap magnet geometry.

The paintable enclosure is constructed of thick, ABS plus fiberglass and is heavily braced to maximize low-frequency performance.

The system is equipped with a 200W 70V/100V multi-tap transformer. Connection is made via outdoor-rated terminals in a recessed terminal cup.

Features:
  • Highly weather-resistant IP56 rating
  • Consistent 120° x 120° broadband pattern control
  • 200 mm (8 in) woofer with Kevlar-reinforced cone and 50 mm (2 in) voice coil.
  • 25 mm (1 in) exit compression driver with unique patented design and high temperature polymer diaphragm.
  • Extraordinary clarity for speech, with extended frequency response for music.
  • Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
  • 250 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.
  • High-power passive crossover network.
  • Overload protection
  • 80 Hz – 20 kHz frequency response.
  • 200 Watt 70V/100V multi-tap (built-in transformer) or direct 8Ω low-impedance.
Specifications:

Frequency Range (-10dB): 80 Hz – 20 kHz
Frequency Response (±3 dB): 100 Hz – 20 kHz
Coverage Pattern: 120° x 120°
Directivity Factor (Q): 8.1 (1 k – 16 kHz)
Directivity Index (DI): 8.4 dB (1 k – 16 kHz)
System Power Rating: 250 W 2 hrs. 200 W 100 hrs
Sensitivity (2.83V @ 1m): 94 dB (Ave. 100 Hz – 20 kHz)
Maximum SPL (1m): Direct 8Ω: 118 dB (peaks of 124 dB) 200 W Tap: 117 dB
Crossover Network: 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF
Nominal Impedance: 8 ohms
Transformer Taps: 70V: 200W, 100W, 50W, 25W100V: 200W, 100W, 50W
LF Driver: Kevlar-reinforced cone with weather treatment, 50 mm (2 in) voice coil.
HF Driver: 25 mm (1 in) diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling.
HF Driver Protection: Minimum audibility SonicGuard™ HF overload protection
Enclosure: ABS with Glass enclosure, heavily braced
Attachment: Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
Grille: Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.
Input Connection: CE-compliant covered barrier strip terminals. Barrier terminals accept up to 9 mm outside 4 mm inside open-lug (#6, #8 or #10) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0 mm (0.16") and 9.0 mm (0.36")
Environmental: IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs).
Dimensions: 300 x 300 x305 mm (11.8 x 11.8 x 12.0), cabinet 331 mm (13.0 in) including gland nut 359 mm (14.2 in) including bracket extending to back
Colors: Available in gray (similar to Pantone 420C) and black (-BK)
Net Weight (each): 9.8 kg (21.5 lb), 11.6 kg (25.5 lb) with U-bracket
Shipping Weight: 14.1 kg (31.0 lb)
Included Accessories: U-bracket, matches loudspeaker color gray, zinc-rich extrathick powder coated, steel.
Crossover Modes: Passive
Nominal LF Driver Impedance: 8 ohms
Suspension Attachment: Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.

© 2024 Echotone Music LLC All Rights Reserved. Any use of any material content, images, or design, without prior written consent from echotonemusic.net, is strictly prohibited by law.
!