Focusrite VOCASTER ONE USB Audio Podcasting Interface for Solo Recording Easy Podcasting

Focusrite VOCASTER ONE USB Audio Podcasting Interface for Solo Recording Easy Podcasting

Get the studio sound your podcast deserves. Capture incredible sound, with enough gain for any XLR mic. Set levels, enhance your sound with one click, and stand out with Vocaster One in seconds. Create great sounding podcasts more easily than ever with Auto Gain, Enhance, the Easy Start tool and award-winning support to get you recording straight away.

Features:
70dB gain range
One mic in and headphone out
Auto Gain
Mute button
Four voice presets
Easy Start

Studio sound in seconds
Auto Gain sets your levels with the click of a button, with more than enough gain on tap for the most popular broadcast mics — no booster needed.

Find your voice
The Enhance but­ton re­veals the true qual­i­ty of your voice. Four pod­cast­er-approved pre­sets bring out the best in any voice in one click, and you can cus­tomise your own with Vo­cast­er Hub.

Cut it out!
Don’t let coughs and sneezes — or any other unexpected interruptions — mess up your podcast. Hit the mute button and silence the mic until you’re ready to go again.

Take it away
Vocaster One is small, light, and powered by your computer, so you can join the conversation wherever it is.

Sound as good as your video looks
You’re one cable away from adding Vocaster’s studio sound to your vlog. No need to sync up in post, just plug in and hit the red button.

Simple setup for podcasting and conference calls

Connect Vocaster to your computer through USB-C to record into the podcast recording software of your choice, and access Vocaster Hub to customise your sound. Impress your colleagues with broadcast-quality audio by selecting Vocaster as your audio input on Zoom, Skype, and Teams. Use the Host XLR input for your microphone and connect your headphones to the Host output at the front of the interface to avoid feedback or echo.

Complete setup for podcasts and streaming

Expanding on the simple setup, you can use the two loopback channels via your computer to bring in additional audio and connect your monitors, DSLR camera, and mobile phone — perfect for video podcasts and livestreaming. Mix and edit your show through your monitors, record broadcast-quality audio straight to your video or live stream, and call in guests or bring in other sound sources through your devices to your podcast.

Quality in
Our Vocaster DM1 dynamic mic, with built-in grille and pop filter, focuses on making you sound like you’re in the studio, so you won’t need to worry about getting a professional sound.

Quality out
HP60v closed-back studio headphones let you hear your show as the world will, and stop the mic from picking up your show mix — avoid any unwanted distractions for your audience.

1. MIC INPUT
Connect any microphone via an XLR cable (included with Vocaster One Studio). 70dB gain range and phantom power control.

2. HEADPHONE OUTPUT
Connect your headphones to hear your show mix as the world will.

3. SPEAKER OUTS
Connect to your speakers in mono or stereo to Vocaster when you’re editing your podcast.

4. PHONE INPUT
Allows you to bring audio in from your phone, including called-in guests. (TRRS to TRRS cable required, not included.)

5. CAMERA OUTPUT
Record your professional podcast audio straight into your camera to make life easy. (TRS to TRS cable required, not included.)

6. AUTO GAIN
Hold down Auto Gain button to have Vocaster listen in and set the correct audio level, so you’re ready to record.

7. ENHANCE
Bring out the best of your voice in one click with a choice of four voice presets, switchable within Vocaster Hub.

8. MUTE
Quickly mute audio to avoid interruptions.

9. MIC GAIN
The coloured gain ring gives you instant visual feedback when your voice level is perfect.

10. VOLUME CONTROL
Keep your volume in check.

INPUTS
Mic input gain range: 70dB
Mic input frequency range: 20Hz – 20kHz

CONNECTIVITY
Requires 900mA USB port
Phone input & output: Mono. Requires 3.5mm TRRS cable, not included
Camera output: Stereo. Requires 3.5mm TRS cable, not included

OUTPUTS
Headphone output frequency range: 20Hz – 20kHz
Speaker output frequency range: 20Hz – 20kHz

WHAT’S IN THE BOX
Vocaster One
Vocaster One audio interface
USB-C to USB-A Cable
Vocaster One Studio
Vocaster One audio interface
Vocaster DM1 studio microphone
Vocaster HP60v closed-back studio headphones
XLR to XLR microphone cable
USB-C to USB-A Cable