Earthworks FW730 7' Cardioid Choir Microphone Boom Stand 30 kHz

Earthworks FW730 7' Cardioid Choir Microphone Boom Stand 30 kHz

FW730 FlexWand Series 30 kHz High-Definition Cardioid Choir Microphone from Earthworks incorporates a highly sensitive 30 kHz FlexWand microphone built into a height-adjustable gooseneck stand. The entire microphone system is sleek, easy to set up, and reproduces audio with incredible detail. The integrated low-profile stand features internal cabling with an XLR connection on the bottom, reducing unsightly cables that can create noise. The height is adjustable from 1.5 to 7', making it easy to position the mic above a choir or group of singers, while the round, cast-iron base ensures stability.
Choir Miking Made Simple.
Integrated choir miking system with 30kHz cardioid microphone, low profile microphone stand and boom.

Unflinching Focus
A near-perfect cardioid polar pattern, with 32dB of rear rejection.

Less is Truly More
A wide coverage area means fewer mics and no spotlighting. Your choir will be heard as one unified voice.

Fully Flexible
The microphone head can be positioned as high as 7 feet and as low as 1.5 feet from the floor. Plus, the microphone cable plugs into the base of the microphone, making it incredibly low profile and clean.

Options
The FlexWand™ microphones have cast iron or tripod base options. Available in cardioid or hypercardioid. Matched pairs available.

Features:
Cardioid polar pattern
Frequency response of 30Hz to 30kHz
Near perfect polar response and the ability to reject sounds from the rear of the microphone, making it a perfect solution for choirs and vocal groups
For applications requiring a tighter pickup pattern with greater off-axis rejection
Large flex section near the center of the stand that couples the stand and the wand
Mini-gooseneck between the end of the wand and the microphone head
The lower section of the stand is 3/4" in diameter and the 24 inch wand is 5/16" in diameter with a 4.5" mini-gooseneck connected at the end which connects to the High Definition Microphone™ head
The combination of a mid-flex section and the mini flex on the wand provide an infinite combination of placement options between 1.5 feet and 7 feet
Substantial improvement in gain before feedback
The near perfect polar response of the FlexWand™ allows the use of fewer microphones on choir, with better sound quality, no spotlighting and incredible rejection of sounds from the rear of the microphone
Ideal where bands or orchestras are placed in front of a choir, as the FlexWand™ will reject much of the sound of the band or orchestra

Specifications:
FREQUENCY RESPONSE 20Hz – 30kHz
POLAR PATTERN Cardioid
SENSITIVITY 10mV/Pa (-40dBV/Pa)
POWER REQUIREMENTS 24-48V Phantom, 10mA
SIGNAL TO NOISE RATIO 78dB (A-weighted)
PEAK ACOUSTIC INPUT 145dB SPL
OUTPUT XLR (pin 2+)
OUTPUT IMPEDANCE 65Ω balanced (between pins 2 & 3)
MIN OUTPUT LOAD 600Ω between pins 2 & 3
SELF NOISE 16dB SPL equivalent (A weighted)
DIMENSIONS Stand 7’ 2” long (2.18m), Base 12” (30.5cm) in diameter, (2.7cm) high
POSITIONING RANGE From 1′ 6″ to 7′ above floor level
WEIGHT Stand 2 lbs. (.9 kg), Base 12.6 lbs. (5.7kg)