Skip to main content
DBX Audio Dbx ZC-3 DriveRack and ZonePRO Series Wall Mounted Zone Remote Controller

Dbx ZC-3 DriveRack and ZonePRO Series Wall Mounted Zone Remote Controller

DBX Audio

$89.00
(No reviews yet) Write a Review
SKU:
35100
UPC:
691991400681
Shipping:
Free Shipping

Out of stock

Dbx ZC-3 DriveRack and ZonePRO Series Wall Mounted Zone Remote Controller

The Zone Controllers offer extended utility to the DriveRack® and ZonePRO™ families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.

The ZC-3 can function as a program selector for the DriveRack 260 and 220i; in addition it can be used for as a source selector, page steering control, or a scene selector for the ZonePRO products.

Features:
  • Programmable Volume Control
  • Program or Scene Selection
  • Programmable Contact Closure Interface
  • Up to 1000 ft. on CAT 5 Cable
  • Programmable Push-ToTalk Paging
  • Programmable Source Selection

Specifications:
Connectors: (2) RJ-45
Series Wiring: Maximum Cable Length varies with number of Zone Controllers. For Example,Three Zone Controllers: 600 ft. Six Zone Controllers: 300 ft.
Parallel Wiring using ZC-BOB: Up to Six Zone Controllers: 1000 ft.
Parallel Wiring Cable: CAT5 or CAT5E with 28.6 Ohm/M (Ohm/1000ft.) nominal DCR and rated VW-1 or higher.
Safety Agency Certifications: UL 60065, IEC 60065, EN 55013, E60065


© 2024 Echotone Music LLC All Rights Reserved. Any use of any material content, images, or design, without prior written consent from echotonemusic.net, is strictly prohibited by law.
!