Community Pro V2-28WT Dual 8" Compact Loudspeaker

Community Pro V2-28WT Dual 8" Compact Loudspeaker

The V2-28 is a two-way, full-range loudspeaker system suitable for use in a wide variety of fixed installations. This versatile unit is ideal for distributed systems such as those found in cafés, restaurants, shopping centers and airports. With its powerful dual cone drivers, the V2-28 provides additional low frequency and midrange output over that of its sister product, the V2-8. When paired with a subwoofer such as the V2-212S, a V2-28 system will produce high-fidelity, broad spectrum sound that belies its modest size. In addition to distributed systems, the V2-28 is an excellent choice for ancillary delay applications. When used to augment a front-of-house system in venues such as auditoria, theaters and houses of worship, delay loudspeakers can significantly even out the difference in sound pressure level from the front of the room to the rear of the room. Units may be positioned for underbalcony fill, overbalcony fill, or simply placed towards the rear of the seating areas. By deploying V2-28 loudspeakers in such a manner, the system designer will have far greater control over relative levels and relative tonal response when commissioning and equalizing the installation.

The V2-28 may be mounted to a wall or ceiling surface using its included yoke bracket, suspended from its M6 threaded rigging points, or installed using a third-party mounting device. It includes a rotatable horn design that allows optimal dispersion in either vertical or horizontal mounting positions.

Features:
• Dual 8 inch compact loudspeaker with a built-in 200 watt autoformer for 70/100 volt applications, white finish
• 90° H x 70° V dispersion (in vertical position)
• Dyna-Tech driver protection circuitry
• Ferrofluid-treated HF driver for improved heat dissipation
• Carbon Ring Cone Technology provides 30% more piston area with increased excursion capability
• Constant-directivity rotatable square horn
• Frequency shaded woofers for smooth vertical pattern control
• Terminal strip and NL4-compatible connectors
• Available in standard black or white finishes
• Mounting yoke included with 10° and 20° vertical standoffs
• 5-year warranty
• Compliant with the US Trade Agreement Act (TAA)

Specifications:
• GENERAL
• Height: 25.5 inches (649 mm)
• Width: 11.3 inches (287 mm)
• Depth: 11.7 inches (298 mm)
• Weight: Including Bracket: 36.7 lbs (16.7 kg) 38.7 lbs (17.7 kg) with autoformer
• Finish: Catalyzed polyester two-part paint, white
• Grille: Powder coated steel, white finish
• Enclosure: Trapezoidal (22.5° included angle) 18mm, 11-ply cross-laminated birch
• Mounting: Mounting/Rigging Provisions: 9 x M6 threaded rigging fittings 4 x M8 for third-party suspension products
• Accessories: Included: Yoke-style mounting bracket with optional 10° and 20° standoffs that allow a 10° or 20° downward or upward vertical tilt
• Optional: CMKIT ceiling mount kit VB-TILT tilting bracket VB-VY28 vertical yoke bracket M6EYBLTKIT 6mm eyebolt kit
• Required Accessories: None
• Ordering Information: V2-28B (low impedance, black finish) V2-28W (low impedance, white finish) V2-28BT (built-in autofomer for 70V100V applications, black finish) V2-28WT (built-in autofomer for 70V100V applications, white finish)
• Operating Environment: Indoor
• Control: None
• Loudspeaker Type : Compact two-way, full-range, trapezoidal, vented bass, frequency shaded LF, user rotatable horn
• Operating Mode: Operating Range: 60 Hz to 18 kHz (-10 dB)
• Beamwidth: Nominal –6dB Beamwidth: 90° H x 70° V (in vertical position)
• Sensitivity: Sensitivity (1W/1m): 94 dB (100 Hz to 12.5 kHz) free space
• Drivers:
• Drivers - LF: 2 x 8-inch cone
• Drivers - HF: 1 x 1-inch
• Driver Protection: DYNA-TECH protection circuitry
• Audio: NL4-compatible locking connector with terminal strip in parallel
• Impedance: Nominal Impedance: 4 ohms
• Minimum Impedance: 3.4 ohms @ 200 Hz
• Maximum Input: Max Input Ratings: 300W continuous, 750W program 34.6 volts RMS, 69.2 volts momentary peak
• Maximum Output: 119 dB SPL / 125 dB SPL (peak)
• Frequency Response: 90 Hz to 16 kHz (±3 dB)

• Specification Notes:
• Sensitivity: Free field pink noise measurement at 6ft (1.8m) at 10% power; extrapolated to 1 meter and an input of 2.83 volts RMS. 2. Watts: All wattage figures are calculated using the rated nominal impedance.