Skip to main content

Clear Com FSII-BP19-X4-US 1.9GHz Digital Wireless Intercom Belt Pack

Clear Com

$2,400.00
(No reviews yet) Write a Review
SKU:
143751
UPC:
123456123946
Condition:
New
Shipping:
Free Shipping

Out of stock

Clear Com FSII-BP19-X4-US 1.9GHz Digital Wireless Intercom Belt Pack

The FSII-BP19 is a rugged, water-resistant beltpack that operates in the ISM licensefree 1.9GHz frequency range. Featuring the “Clear-Com Sound”, the FSII-BP19 has high audio bandwidth for superior intelligibility and listening comfort.

The FSII-BP19 can connect to the FreeSpeak II base station or to Eclipse HX card frame matrices using the E-QUE-HX interface card. FSII-BP19 users can roam seamlessly between FSII-19-TCVR antennas over wide areas. The “Listen Again” feature allows users to replay earlier commands, eliminating the need to repeat communication or disturb productions. FSII-BP19 have continuous reception over a 1400 ft range in good radio conditions.

The FSII-BP19 can be mixed with FSII-BP24 on the same system, increasing the quantity of beltpack users in a single radio space. In the US, between 50 – 65 users can operate on a single system, while the rest of the world can have between 70 - 90 users in the same radio space.

The FSII-BP19 are IP-65 rated for wet weather or dusty conditions making them ideal for outdoor productions. For better grip and protection, the beltpacks have a rubberized over-mold to protect from the most rugged environments.

Using the BAT60 Li-Ion battery, the FSII-BP19 has 18+ hours of battery life. Using an alternative set of 3 AA cells, the battery life is 6-9 hours. The beltpacks also include an USB charging port for recharging or for continuous powered transmissions.

Features:
Functions with FSII-Base, and FSII-Base-II, FreeSpeak Edge Base Station, Arcadia Central Station, E-IPA-HX Cards, and FSII Splitter
Typical indoor range: 300 ft (90 m), outdoor range: 800 ft (240 m)
1.9 and 2.4 GHz beltpacks operate interchangeably on a single system
5 to 200 beltpacks supported on a single system (See Product Line Cross Functionality Chart)
Encoder Volume Swap between A&C and B&D
"Listen Again" message replay
Simple 2-channel partyline operation to 5-channel intercom on the same beltpack
Over-the-air beltpack registration
18+ hour battery life or USB port for continuous operation
XLR-4M headset connector
IP53 rating for wet and dusty conditions
Built-in flashlight

Specifications:
Audio
Audio Bandwidth: 200Hz-7.5KHz
No. of Full-Duplex Audio Paths: Up to 5 with individual level control (2 dedicated rotaries, 3 with menu), 2 controls and a main volume
Mode of Operation: Full duplex on all routes
Level/Talk Controls: 4 pushbuttons, a reply button and 2 rotary controls
Enter/Answer-Back Button: 1
Frequency Spectrum
USA, Canada, Mexico: 1920-1930 MHz
Transceiver Range Output Power: 100mW
EU, Russia, Ukraine, Singapore, Hong Kong, Australia, New Zealand, South Africa: 1880-1900 MHz
Transceiver Range Output Power: 250mW
Japan: 1893-1906 MHz
Transceiver Range Output Power: 250mW
Argentina: 1910 MHz-1930 MHz
Transceiver Range Output Power: 250mW
Brazil: 1910 MHz-1930 MHz
Transceiver Range Output Power: 250mW
Chile: 1910 MHz-1930 MHz
Transceiver Range Output Power: 70mW
Taiwan: 1880-1895 MHz
Transceiver Range Output Power: 250mW
Connectors
Headset Connector: 4-pin male, Clear-Com standard, options for 5-pin female and 7-pin male with PTT
Headset Voltage: Maximum of ~+8dBu as set by firmware
Microphone Type: Electret and Dynamic, selectable in beltpack menu
Microphone Voltage: Electret Mic:-45dBu (additional 2.5V DC bias voltage positive on Pin 2 and negative on Pin 1 via a 1k resistor).
Dynamic Mic: -55dBu
Headset Limiter: Selectable from beltpack menu
Power
Modulation: GFSK, TDMA frame 10ms Full and Long slot
Output Power: (EU/Russia) 10dBm average, (US) 18-20dBm
Range: Typical indoor range 300ft (90m), outdoor range 800ft (240m)
Battery: Li-Ion or 3 AA alkaline cells
Battery Charging: Drop-in charger (AC60) or local USB
Battery Life: 18+ hours with Li-Ion; 9 hours with 3 x Alkaline AA cells
Environmental
IP53 water and dust resistance
Operating: 32º-125ºF (0º-50ºC)
Storage: 32º-150ºF (0º-70ºC)
Humidity: Between 20% and 90%, Non-Condensing
Dimensions:
Tapered design at largest points
3.75 x 5 x 1.5in (HxWxD)
(97 x 130 x 45mm)
Weight:
9.0oz (0.4kg) including batteries

© 2024 Echotone Music LLC All Rights Reserved. Any use of any material content, images, or design, without prior written consent from echotonemusic.net, is strictly prohibited by law.