Clear Com FSII-BASE-II Digital Wireless Base Station up to 25 FSII Belt Packs

Clear Com FSII-BASE-II Digital Wireless Base Station up to 25 FSII Belt Packs

FSII-Base-II-5 FreeSpeak II Digital Wireless Base Station is the perfect companion for all of your 1.9GHz and 2.4GHz FSII beltpacks. With compatibility for up to five packs, routing and configuration for all of your units can be handled by a single base station. The FSII-Base-II-5 features a quartet of 2-wire connections for analog partyline connection, alongside four 4-wire audio connections and four displays equipped with soft keys.

Features:
Supports both 1.9GHz and 2.4GHz FSII beltpacks on a single base station
Routing and configuration of up to 25 FreeSpeak II beltpacks
Four 2-wire ports with call signal, auto nulling (Clear-Com and RTS)
Supports 2 transceivers natively and up to 10 transceivers via FSII splitter
Fiber transceiver connections, supports two fiber-enables FSII splitters
Multi-mode user interface has monitoring, setup and main station modes with assignable soft keys
GPIOs allow assignment to trigger cue lights, tally or radios
Matrix and partyline configurations support up to 12 channels and/or groups
DECT Sync ports for optimizing co-located systems
RF Audio Filter improves system performance in hard RF environments
Browser-based Core Configuration Manager (CCM) with InSite for real-time statistics, beltpack and transceiver diagnostics, and functionality such as Remote Mic Kill
Text messaging from CCM to wireless beltpacks

Specifications:
Base-to-Beltpack Frequency Response: 100Hz - 7.1kHz
No. of Beltpacks per Base Station: 25
No. of Transceiver/ Antennas Supported by Base: 10
No. of Active Transceiver Ports: 2, one port can remotely power up to 1 FSII splitter or 1 FSII transceiver
PC Programming Port: 2 LAN RJ45
Relay Port: DB15, supports one relay assigned to the SA out
Partyline A , B, C ,D (each): XLR-3F, on/off termination switch, Clear-Com and RTS compatible
Partyline Power On/Off: A/B, C/D paired
Partyline Output Voltage: 26 - 28V DC, 400mA per pair (A/B or C/D)
4-Wire/Matrix Connection: 4 RJ45
Program Input: XLR-3F, transformer isolated, line-level input
Stage Announce Output: XLR-3M, transformer isolated, line-level output
Front Panel Headset: 4-pin male and 5-pin female options
Front Panel Displays: 4 OLED’s with encoders and assignable soft keys
Front Panel Indicators: Antenna Status, Beltpack Status
External Power Supply Connection: 12V DC Base Station
Programming/Editing: Push-to-enter rotary encoder
Power
Input: 100-240V AC, 1.4A max
Output: 12V DC, 60W,
5A Current Draw: 12V, 4A max, 48W max
Dimensions
1.75 x 19.0 x 10.2in (HxWxD)
(44 x 483 x 259mm)
Weight
5.57lbs (2.5kg)