Aviom D800-DANTE A Net Distributor w/ A Net Bridge Input and Dante Interface

Aviom D800-DANTE A Net Distributor w/ A Net Bridge Input and Dante Interface

D800-Dante A-Net Distributors provide the link between the Dante network, input module, or console card and the Personal Mixers, providing power and a copy of the digital audio stream to your Aviom Personal Mixers, utilizing standard cables.

Both units also integrate additional advanced options for delivering high-channel-count audio streams to your Personal Mixers, streamlining connections between A640 and A360 Personal Mixers and transmitters for wireless in-ear monitors.

D800-Dante can be used with A640*, A360, A320, and A-16II Personal Mixers in any combination.

the D800-Dante do an unglamorous but important job: get power and audio to your Personal Mixers. Set-up is a breeze, with no IP addressing, routing, or switch managing to worry about, so you can get set up and start mixing in no time, without a lot of hassle.

With the D800-Dante, you can run your Dante network at 44.1/48kHz, 88.2/96kHz, or 176.4/192kHz. At higher sample rates, the D800-Dante converts the audio data to 48kHz for distribution to the Aviom Personal Mixers (and other A-Net devices).

If you need more than eight Personal Mixers, the D800-Dante include an A-Net Out port on the rear panel—perfect for sending the incoming audio stream (regardless of its original source) on to additional A-Net Distributors. Learn more about expanding your system.

D800-Dante manage communication between A360 Personal Mixers and supported iOS devices, allowing users to run the A360 Display™ app alongside their A360.

Features:

• Distributes power and audio to up to eight A360,
  
• A320, A-16II, and A-16R Personal Mixers
  
• One Pro16e A-Net In supports A-Net Bridge input from up to four synchronous Pro16 A-Net streams
  
• Network Mix Back for streamlined connections to wireless IEM transmitters
  
• Ethernet support for iOS devices over Wi-Fi
  
• One Pro16e A-Net Out for thru connections
  
• Heavy-duty locking connectors for all audio connections
  
• Direct connectivity to a Dante™ audio network
  
• Support for up to 64 Dante network channels

Specifications:
A-Net to/from Personal Mixers (front panel): Eight locking RJ45 connectors, powered; Compatible with A-16II, A320, and A360 Personal Mixers; 2-position switch (I/II) accommodates A-16II and A320 (I) and the bidirectional A360 Personal Mixer (II)
A-Net In or A-Net Bridge In: Accepts Pro16 or Pro16e A-Net; one locking RJ45 connector
A-Net Out (rear panel): Pro16e A-Net; one locking RJ45 connector, unpowered Supports system expansion and the A-16II, A320, and A360 Personal Mixers
A-Net Mixes Out: Pro16e A-Net; One locking RJ45 connector, unpowered; Provides up to 16 channels (8 stereo pairs) of Network Mix Back™ data from up to eight A360 Personal Mixers
Ethernet: One RJ45 connector; for iOS A360 Display support
LEDs: Power On (red); Sync (green)
USB: Used for firmware updates
A-Net Cables: Front Panel Connections: Shielded Cat-5e (or better) cable must be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits. Unshielded Cat-5e cable may be used on all rear panel connections
Output Voltage for Personal Mixers: 24VDC, 0.5 amp Transmitted over the Cat-5e cable
Power Supply: Internal, universal switching type, IEC connector
Input Voltage: 100-240VAC, 50-60Hz, 300W Fuse - 250VAC~ T4AL
Dimensions: 19" (482.6 mm) wide x 14.25" (362 mm) deep; 2U, 3.5" (88.9 mm) high
Weight: 12.0 lbs (5.44 kg)