Skip to main content
Audix DN4 Dante Analog microphone Interface 4 Channel CAT5 RJ45 Ethercon

Audix DN4 Dante Analog microphone Interface 4 Channel CAT5 RJ45 Ethercon

Audix

$1,001.00
(No reviews yet) Write a Review
SKU:
241886
UPC:
687471151006
Shipping:
Free Shipping
Adding to cart… The item has been added
Audix DN4 Dante Analog microphone Interface 4 Channel CAT5 RJ45 Ethercon 

Ships Free!

The DN4 is a 4-channel, analog-microphone-to-Dante (or AES67) interface featuring selectable pre-amp gain, low- and high-pass filters, and LED logic control.

The DN4 microphone interface is a key part of the Audix Dante | AES67 Integrated Microphone System, the fast, trouble-free way to stream Audix audio performance through Ethernet networks. High-quality audio and all microphone functions – including on-off contact closure and LED status indicators – are available through a single CAT5 – CAT7 cable with RJ45 connections at both interface and microphone. This simple configuration eliminates wiring errors, accelerates installation, and reduces cost.

The DN4 features four inputs for Audix RJ45-equipped, single-element microphones and two 5V logic outputs per port, with source/sink capability for LEDs that are controlled by network-connected DSPs and one logic input per port for buttons. Low-pass and high-pass filter settings are available on each audio channel, as are eight selectable gain levels, with all settings configurable via software.

Designed, assembled, and tested by Audix in the USA.

FEATURES
  • Compatible with all Audix RJ45-equipped, single-element, analog microphones
  • High-fidelity 24-bit, 48kHz audio
  • Balanced audio inputs with RFI filtering
  • 48V phantom power output
  • Each channel has eight selectable pre-amp gain levels, as well as low- and high-pass filters
  • All channels controlled independently
  • Flash memory prevents loss of settings in the event of power loss
DANTE FEATURES
  • Supports AES67 audio streams
  • Dante Domain Manager (DDM) ready
  • Dynamic or static IP address
  • Evaluated to the requirement of UL2043 and is suitable for use in above-ceiling application
POWER FEATURES
  • Operates on PoE from any IEEE 802.3af compliant equipment
What's in the box

1x DN4 microphone interface
1x Mounting brackets (pair MNTDN), with attachment screws
1x 1.56 mm / 0.063 inch seismic and fire cable restraint

Specifications:

Mic Input             Balanced, RFI filtered
Mic Input Connector     Shielded 8P8C, RJ45
Phantom Power             48VDC, 14 mA / port (short circuit protected)
Max Input                   (0 dB gain) -14 dBu, 155 mV
Input Impedance (balanced)  1.15 kΩ
Frequency Response     15 Hz – 22 kHz, +0, -3 dB
THD+N (1 kHz, 0 dB gain)    0.003 %
CMMR (typ.)                 50 dB
EIN (typ., unweighted)    -120 dBu
SNR (typ., unweighted)    -96 dB
Channel Crosstalk (1 kHz)  < -80 dB
Dante™ / AES67 Channels     4
Dante™ Chipset            UXT-01-004
Sample Rate                 48 kHz
Word Width                  24-bit
Logic Inputs Per Port    1 per single-element microphone port
Logic Outputs Per Port    2
Low-pass Options    Off, 5 kHz, 7 kHz, 10 kHz
High-pass Options    15 Hz, 238 Hz
Gain Options            0 dB, +8 dB, +12 dB, +15 dB,+18 dB, +24 dB, 30 dB, +36 dB
Power External DC Jack PoE (IEEE 802.3af) +48VDC, 125 mA CLASS 2 (3.84 – 6.49 W)
Height                    28 mm (1.11 in)
Width                    202 mm (7.95 in)
Depth                 125 mm (4.92 in)
Weight                     0.64kg (1.41 lbs)
Temperature             10-50 °C (50-122 °F)
Compliance             FCC Part NN (USA) CE marked (Europe) RoHS WEEE Directive
© 2024 Echotone Music LLC All Rights Reserved. Any use of any material content, images, or design, without prior written consent from echotonemusic.net, is strictly prohibited by law.
!