Skip to main content
Audio-Technica U853R Cardioid Condenser Hanging Microphone for Recording App

Audio-Technica U853R Cardioid Condenser Hanging Microphone for Recording App

Audio-Technica

$209.00
(No reviews yet) Write a Review
SKU:
37160
UPC:
042005140671
Shipping:
$9.99 (Fixed Shipping Cost)
Adding to cart… The item has been added
Audio-Technica U853R Cardioid Condenser Hanging Microphone for Recording Application

Perfect for speech, theater, orchestra, and choir sound reinforcement and recording, the U853 condenser hanging microphone is equipped with UniGuard® innovations that offer unsurpassed immunity from radio frequency interference. This phantom-powered microphone accepts interchangeable elements – omnidirectional (360°), cardioid (120°), hypercardioid (100°)

U853R: cardioid polar pattern (120° acceptance angle); 25.0' (7.6 m) cable terminated with a TA3F connector for use with the included AT8538 phantom power only in-line power module (80 Hz high-pass UniSteep® filter); black finish.

Features
  • Designed for suspension over choirs, instrumental groups and theater stages
  • Wall/ceiling plate power module permits permanent installation in standard metal U.S. single gang electrical box
  • Superior off-axis rejection for maximum gain before feedback
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Accepts interchangeable elements to permit angle of acceptance from 90° to 360°
  • Low-profile design with low-reflectance finish for minimum visibility

Specifications

Microphones
Element: Fixed-charge back plate, permanently polarized condenser
Frequency Response: 30-20,000 Hz
Low Frequency Roll Off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: -39 dB (11.2 mV) re 1V at 1 Pa
Maximum Input Sound Level: 139 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 115 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 70 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 2 mA typical
Switches: Flat, roll-off
Weight (Microphone): 0.5 oz (14 g)
Weight (Power Module): 2.9 oz (81 g)
Weight: 14 g (0,5 oz)
Cable: 25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2 conductor shielded cable with TA3F-type connector
Dimensions: 1.34" (34.0 mm) long, 0.48" (12.2 mm) diameter
Dimensions (Power Module): 
3.66" (92.9 mm) long,
0.74" (18.9 mm) diameter
Dimensions (Microphone): 
1.34" (34.0 mm) long,
0.48" (12.2 mm) diameter
Output Connector (Power Module): Integral 3-pin XLRM-type
Output Connector: Integral 3-pin XLRM-type
Accessories Included: AT8153 two-stage foam windscreen; AT8451 steel hanger; AT8538 power module; AT8438 5/8"-27 stand adapter
Audio-Technica Case Style: M12
© 2024 Echotone Music LLC All Rights Reserved. Any use of any material content, images, or design, without prior written consent from echotonemusic.net, is strictly prohibited by law.
!