Audio Technica ES933PMWH Hypercardioid Condenser Hanging/Ceiling Microphone
The ES933 condenser hanging microphone is designed for quality sound reinforcement, professional recording, television, and other demanding sound pickup applications. Its low-profile design and excellent response make it ideally suited for suspending over choirs, instrumental groups and theater stages.
The microphone is equipped with a 15.2 m (50') permanently attached miniature cable, terminated with a TA3F-type connector that attaches to compatible Audio-Technica power modules. UniGuard® RFI-shielding technology protects the microphone from radio frequency interference (RFI).Â
The microphone comes with a two-stage foam windscreen and vinyl-coated steel hanger. Additional interchangeable elements – omnidirectional (360°), cardioid (120°), hypercardioid (100°), and MicroLine® (90°) – are available separately.
ES933PMWH: hypercardioid polar pattern (100° acceptance angle); AT8534 wall/ceiling plate power module (+10 dB gain switch, 80 Hz high-pass UniSteep® filter); low-reflectance white finish.
Features:
- Designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications
- Small size and excellent response are ideal for suspension over choirs, instrumental groups and theater stages
- Available interchangeable elements permit angle of acceptance from 90º to 360º
- Superior off-axis rejection for maximum gain before feedback
- Requires 11V to 52V DC phantom
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Integral UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
Specifications:
Microphones
Element: Fixed-charge back plate, permanently polarized condenser
Frequency Response: 30-20,000 Hz
Low Frequency Roll Off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: -40 dB (10.0 mV) re 1V at 1 Pa
Maximum Input Sound Level: 138 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 109 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 65 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 2 mA typical
Switches: Flat, roll-off
Weight (Microphone): 5.5 g (0.2 oz)
Weight (Power Module): 81 g (2.9 oz)
Cable: 15.2 m (50') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable, terminated with TA3F-type connector
Dimensions (Power Module): 92.9 mm (3.66") long,
18.9 mm (0.74") diameter
Dimensions (Microphone): 27.5 mm (1.08") long,
8.4 mm (0.33") head diameter
Output Connector (Power Module): Integral 3-pin XLRM-type
Optional Interchangeable Elements: ESE-O omnidirectional (360°), ESE-H hypercardioid (100°), ESE-ML MicroLine® (90°)
Accessories Included: AT8109 two-stage foam windscreen, AT8452 steel hanger
Audio-Technica Case Style: M25
© 2024 Echotone Music LLC All Rights Reserved. Any use of any material content, images, or design, without prior written consent from echotonemusic.net, is strictly prohibited by law.