Audio Technica ATND1061DAN Beamforming Ceiling Array Microphone Plenum Rated

Audio Technica ATND1061DAN Beamforming Ceiling Array Microphone Plenum Rated

The ATND1061 Beamforming Ceiling Array Microphone is an ideal solution for conference rooms, boardrooms, and meeting spaces large and small. The microphone may be used singly or in multiples (for larger meeting spaces) to capture every person speaking in a room with clear, natural audio that reduces distracting environmental sounds. A state-of-the-art professional product in a familiar form factor (roughly the size of a wireless access point), the ATND1061 is easy to install, set up, and operate.

Room configuration, zone setup, and other settings are handled through the user-friendly Digital
Microphone Manager software application. The ATND1061 has six individual output channels, which, collectively, can be configured with up to 32 user-defined microphone pickup zones, providing the flexibility to cover a wide variety of room sizes and meeting types.

Our proprietary voice activity detection (VAD) technology enables the microphone to discern between a voice and unwanted noises such as paper shuffling. For integrations without external digital signal processing (DSP), the ATND1061 features powerful onboard DSP, including automix, acoustic echo cancellation (AEC), noise reduction, automatic gain control (AGC), and 4-band EQ.

Exclusion zones can be set to avoid known sources of unwanted noise (such as air-handling systems), helping to maximize the effectiveness of the built-in noise-reduction and automatic-mixing functions.

Features:
• The ATND1061 beamforming microphone array is an ideal solution for conference rooms, boardrooms, and meeting spaces large and small
• The ATND1061 beamforming microphone array is available in two configurations:
ATND1061DAN – Dante™-enabled
ATND1061LK – A-T LINK enabled
• ATND1061 is enabled with VISCA over IP to control PTZ (pan-tilt-zoom) cameras and other video equipment over a network and sync with microphone audio
• ATND1061 is equipped with voice lift technology that allows everyone in a large meeting space to hear equally well – regardless of how far away they are from the person speaking
• Powerful onboard DSP: automix, acoustic echo cancelation, noise reduction, automatic gain control, and 4-band EQ
• User-friendly Digital Microphone Manager software easily configures single or multiple ATND1061 microphone settings
• Six individual output channels with up to 32 user-defined microphone pickup zones provide the flexibility to cover a wide variety of room sizes and meeting types
• Output Channel 1 can be configured with up to 16 user-defined Coverage Zones to ensure coverage of nonpriority or unplanned participants
• Output Channels 2–6 can be configured with up to 16 user-defined Priority Zones to ensure priority pickup of participants in known locations
• Proprietary voice activity detection (VAD) technology enables the microphone to discern between a voice and unwanted noises such as paper shuffling
• Exclusion zones can be set in the software to avoid known sources of unwanted noise (such as air-handling systems)
• Two network ports with Single Cable and Split modes to send Dante audio and microphone control data together or separately over category cable (ATND1061DAN)
• Mounts flush or on the surface of a drop ceiling or hard ceiling, or in open architecture spaces using VESA mount
• UL 2043 compliant for installation in plenum spaces
• Includes tile bridge, safety wiring, and mounting hardware and accessories
• Low-reflective white finish matches ceiling tiles in most environments
• Powered by network PoE

Specifications:

Microphone
• Beam Width: 90-degrees
• Polar Pattern: Beam pattern
• Frequency Response: 60 Hz to 18,000 Hz
• Maximum Input Sound Level: 102 dBSPL
• Sensitivity: -8 dBFS (1 kHz, 94 dBSPL)
• Dynamic Range: 89 dB (A-weighted)
• Signal-to-Noise Ratio: 61.5 dB (A-weighted)
• Self-Noise: 25 dBSPL (A-weighted)

Analog Audio
• Frequency Response: 20 Hz to 20 kHz (+1.0/-2.0 dB)
• Dynamic Range: 100 dB (A-weighted)
• Signal to Noise Ratio: 80 dB (A-weighted)
• Headroom: 20 dB
• Residual Noise: -75.8 dBu (A-weighted)
• T.H.D: <0.1% (1 kHz, unity)
• Analog Input:
MIC Maximum: -30 dBu
MIC Unity: -50 dBu
LINE Maximum: +12.2 dBu
LINE Unity: -10 dBV, Switchable
• Analog Output:
OUTPUT Maximum: +19.2 dBu
OUTPUT Unity: +4 dBu/-10 dBV/-33 dBV, Switchable

General Specifications - Beamforming Array
• Power Requirement: PoE (IEEE 802.3af Class 0)
• Power Consumption: Max. 7 W
• Operation Temperature Range: 0°C to 40°C (32°F to 104°F)
• Operation Humidity Range: 25% to 85% (Non condensing)
• Dimensions: 227.5 mm (9.0”) × 227.5 mm (9.0”) × 30 mm (1.2”) （W × D×H)
• Weight: 1250 g (44 oz)
• Network:
Dante: 1 Gbps
IP control: 100 Mbps
• Digital Audio:
Sampling rate: 48 kHz
Bit depth: 24 bit
• Latency:
Microphone (CH1 to CH6): 47 msec
Microphone (Auto Mix CH): 79 msec
Dante: Min. 250 usec, Max. 5 msec
• I/O Connector:
Network/Dante (ATND1061DAN): RJ-45
A-T LINK (ATND1061LK): RJ-45
Analog input: Euroblock 3 pin
Analog output: Euroblock 3 pin
GPI: Euroblock 3 pin
• Phantom Power: Analog input: 12 V
• Included Accessories:
・IR remote controller
・Surface mount adapter
・Screw (M4 × 50 mm) × 4
・Flush mount adapter
・Flush mount cover
・Screw (M4 × 10 mm) × 12
・Hole cover
・Nut × 4
・Snap bushing × 2
・Tile bridge A × 2
・Tile bridge B × 2
・Tile bridge C × 4
・Seismic cable
・Zip tie
・Safety belt
・Euroblock connector × 3
・Installation template