Skip to main content
Audio Technica AT8035 Line and Gradient Polarized Condenser Microphone

Audio Technica AT8035 Line and Gradient Polarized Condenser Microphone

Audio-Technica

$269.00
(No reviews yet) Write a Review
SKU:
49561
UPC:
4961310098254
Shipping:
$12.99 (Fixed Shipping Cost)

Out of stock

Audio Technica AT8035 Line and Gradient Polarized Condenser Microphone

The length (14.53") of the AT8035 Line + Gradient Condenser Microphone is well-suited for ENG, outdoor recording and other specialized uses. The microphone is designed for video production and broadcast (ENG/EFP) audio acquisition. Suited for both boom & handheld use, it provides the narrow acceptance angle desirable for long-distance sound pickup, featuring excellent sound rejection from the sides and rear of mic and switchable low-frequency roll-off. It operates on battery or phantom power.

Features:
  • Designed for video production and broadcast (ENG/EFP) audio acquisition
  • Length is well-suited for ENG, outdoor recording and other specialized uses
  • Provides the narrow acceptance angle desirable for long-distance sound pickup
  • Excellent sound rejection from the sides and rear of mic
  • Switchable low-frequency roll-off
  • Operates on battery or phantom power
  • RoHS compliant—free from all substances specified in the EU directive on hazardous substances

Specifications:
Microphones
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Line + gradient
Frequency Response: 40-20,000 Hz
Low Frequency Roll Off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: Phantom: –38 dB (12.5 mV) re 1V at 1 Pa
        Battery: –39 dB (11.2 mV) re 1V at 1 Pa
Maximum Input Sound Level: Phantom: 132 dB SPL, 1 kHz at 1% T.H.D.
Battery: 120 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: Phantom: 110 dB, 1 kHz at Max SPL
                Battery: 98 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 72 dB, 1 kHz at 1 Pa
                 Phantom Power Requirements 11-52V DC, 2 mA typical
Battery Type: 1.5V AA/UM3
Battery Current/Life: 0.4 mA / 1200 hours typical (alkaline)
Switches: Flat, roll-off
Weight: 170 g (6.0 oz)
Dimensions: 369.0 mm (14.53") long,
        21.0 mm (0.83") diameter
Output Connector: Integral 3-pin XLRM-type
Accessories Included: AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8132 windscreen; battery; protective carrying case
Audio-Technica Case Style: SG1


© 2024 Echotone Music LLC All Rights Reserved. Any use of any material content, images, or design, without prior written consent from echotonemusic.net, is strictly prohibited by law.
!