Skip to main content
Audio-Technica AT4053B Vocal & Instrument Hypercardioid Condenser Microphone

Audio-Technica AT4053B Vocal & Instrument Hypercardioid Condenser Microphone

Audio-Technica

$699.00
(No reviews yet) Write a Review
SKU:
77433
UPC:
4961310135973
Shipping:
Free Shipping
Adding to cart… The item has been added
Audio-Technica AT4053B Vocal & Instrument Hypercardioid Condenser Microphone

Ships Free!

This versatile studio performer may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. And its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).

Features
  • Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
  • Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Direct-coupled, balanced output results in a clean signal even under high-output conditions
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • Switchable 80 Hz hi-pass filter and 10 dB pad
  • Rugged turned-brass microphone housing for enduring dependability
  • State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards
  • RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)

Specifications

Microphones
Element: Externally polarized (DC bias) capacitor
Polar Pattern: Hypercardioid
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
Maximum Input Sound Level:
145 dB SPL, 1 kHz at 1% T.H.D.;
155 dB SPL, with 10 dB pad (nominal)
Noise: 16 dB SPL
Dynamic Range: 129 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 78 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 48V DC, 4.8 mA typical
Switches: Flat, roll-off; 10 dB pad (nominal)
Weight: 127 g (4.5 oz)
Dimensions: 155.0 mm (6.10") long,
21.0 mm (0.83") maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Optional Interchangeable Elements:
AT4049b-EL (omnidirectional);
AT4051b-EL (cardioid)
Accessories Included: AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case
Audio-Technica Case Style: S1
© 2024 Echotone Music LLC All Rights Reserved. Any use of any material content, images, or design, without prior written consent from echotonemusic.net, is strictly prohibited by law.
!