Skip to main content
Audio-Technica AT4033A Pro Studio Recording Cardioid Condenser Microphone

Audio-Technica AT4033A Pro Studio Recording Cardioid Condenser Microphone

Audio-Technica

$399.00
(No reviews yet) Write a Review
SKU:
219280
UPC:
4961310137816
Shipping:
Free Shipping
Adding to cart… The item has been added
Audio-Technica AT4033A Pro Studio Recording Cardioid Condenser Microphone

Ships Free!

Cardioid Condenser Microphone
The side-address AT4033a offers low-noise, symmetrical, transformerless circuitry that results in exceptional transient response and clean output signals.

The legend, The revolution

The AT4033 cardioid condenser microphone has been considered an essential product in most professional recording studios since 1991, when it became the first high-quality studio microphone released for under $1000, at a time when most competing products were retailing for around $2000. The internal electronics of the original version have been somewhat modified with the arrival of the AT4033a, as has the capsule suspension system, in order to maximise the reduction of any adjustment noises or vibrations. With its low noise (17dB SPL), high sensitivity and high tolerance to high sound pressure levels (up to 155dB with the 10dB pad), the AT4033a has an excellent quality / price / performance ratio that remains competitive to this day.

transformerless circuitry
Transformerless circuitry virtually elimiates low-frequency distortion and provides superior correlation of high-speed transients.

manufactured for quality
The AT4033a's diaphragm is protected by a two-layer grille and a thin acoustic foam.

AT8449a shock mount
Custom shock mount provides superior isolation against unwanted noise and vibration

2 MICRON thick DIAPHRAGM
The 2-micron-thick, vapor-deposited gold diaphragm undergoes a five-step aging process so that the optimum characteristics achieved remain constant over years of use

Features
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides excellent transient response
  • Low-cut filter 80 Hz, 12 dB/Octave 
  • Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
  • Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
  • The 2-micron-thick, vapor-deposited gold diaphragm undergoes a five-step aging process so that the optimum characteristics achieved remain constant over years of use
  • AT8449a shock mount included
  • Made and assembled in Japan. Lifetime guarantee*

Specifications

Microphones
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 30 - 20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 Pa
Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
Dynamic Range: 128 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 77 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 48V DC, 3.2 mA typical
Weight: 380g
Dimensions: 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Accessories Included: AT8449a shock mount for 5/8"-27 threaded stands; protective carrying case
© 2024 Echotone Music LLC All Rights Reserved. Any use of any material content, images, or design, without prior written consent from echotonemusic.net, is strictly prohibited by law.
!