Skip to main content
Audio-Technica AE3000 Large-diaphragm Cardioid Condenser Instrument Microphone

Audio-Technica AE3000 Large-diaphragm Cardioid Condenser Instrument Microphone

Audio-Technica

$299.00
(No reviews yet) Write a Review
SKU:
29921
UPC:
4961310088521
Shipping:
Free Shipping

Out of stock

Audio-Technica AE3000 Large-diaphragm Cardioid Condenser Instrument Microphone

Ships Free!

The Artist Elite® AE3000 delivers supreme performance at extreme SPLs. This high-SPL large diaphragm cardioid condenser instrument mic excels in applications such as guitar cabinets, toms, snare, timpani, horns and overheads. Its large-diaphragm capsule combines with the open architecture of the headcase to provide an extremely accurate and open sound. Its low-profile side-address design with tapered grille allows for optimal positioning.

Features
  • Excels in high-SPL applications
  • Large-diaphragm capsule combines with the open architecture of the headcase to provide an extremely accurate and open sound
  • Low-profile side-address design with tapered grille allows optimal positioning of element vis-à-vis sound source
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Robust design for enduring dependability on the road
  • Integral 80 Hz HPF switch and 10 dB pad

Specifications

Microphones
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -43 dB (7.0 mV) re 1V at 1 Pa
Maximum Input Sound Level:
148 dB SPL, 1 kHz at 1% T.H.D.;
158 dB SPL, with 10 dB pad (nominal)
Noise: 11 dB SPL
Dynamic Range: 137 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 83 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 3 mA typical
Switches: High-pass filter;
10 dB pad (nominal)
Weight: 6.0 oz (170 g)
Dimensions: 4.55" (115.5 mm) long,
1.89" (48.0 mm) maximum diameter
Output Connector: Integral 3-pin XLRM-type
Accessories Included: AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
© 2024 Echotone Music LLC All Rights Reserved. Any use of any material content, images, or design, without prior written consent from echotonemusic.net, is strictly prohibited by law.
!