Audio Technica AE2500 Dual Element Cardioid Instrument Condenser and Dynamic Mic
AE2500 The ultimate kick-drum mic, the Artist Elite AE2500 dual-element instrument microphone features cardioid condenser and dynamic capsules combined in one housing. The dynamic element delivers the aggressive attack of the beater; the condenser captures the round tonalities of the shell. Two layers of resistive mesh form multiple densities over the dynamic elementās side-entry ports, exercising precise control over the time at which off-axis signals arrive at the diaphragm. The condenser diaphragm is optimally tensioned and aged for long-term consistency and stability.
Features:
- Revolutionary dual-element design represents a ground-breaking transducer achievement
- Two elements (condenser and dynamic) are enclosed in a single housing
- Dynamic element delivers the aggressive attack of the beater while the condenser captures the round tonalities of the shell
- Elements are positioned in a perfect phase relationship, something practically unachievable with two separate microphones
- Robust design for enduring dependability on the road
- Integral 80 Hz HPF switch and 10 dB pad on condenser element
- Includes isolation clamp for shock protection, secure mounting and easy positioning
- Includes a 16.5' (5 m) cable (5-pin XLRF to two standard 3-pin XLRM connectors) for separate control over each element
Specifications:
Microphones
Element: Condenser, dynamic
Polar Pattern: Cardioid
Frequency Response: 20-17,000 Hz (condenser)
30-10,000 Hz (dynamic)
Low Frequency Roll Off: 80 Hz, 12 dB/octave (condenser)
Open Circuit Sensitivity: -51 dB (2.8 mV) re 1V at 1 Pa (condenser)
-54 dB (1.9 mV) re 1V at 1 Pa (dynamic)
Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D. (condenser);
158 dB SPL, with 10 dB pad (nominal)
Dynamic Range: 124 dB, 1 kHz at Max SPL (condenser)
Signal-to-Noise Ratio: 70 dB, 1 kHz at 1 Pa (condenser)
Phantom Power Requirements: 11-52V DC, 3 mA typical (condenser)
Switches: (Condenser Only) High-pass filter;
10 dB pad (nominal)
Weight: 13.8 oz (390 g)
Cable: 16.5' (5 m) dual shielded, 8-conductor cable, 5-pin XLRF-type connector at microphone, two 3-pin XLRM-type output connectors
Dimensions: 6.50" (165.0 mm) long,
2.17" (55.0 mm) maximum diameter
Output Connector: Integral 5-pin XLRM-type
Accessories Included: AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
Audio-Technica Case Style: R8
© 2024 Echotone Music LLC All Rights Reserved. Any use of any material content, images, or design, without prior written consent from echotonemusic.net, is strictly prohibited by law.