Atlona AT-OME-ST31A-KIT 3 Channel Extender Kit TX RX for HDMI and USB C

Atlona AT-OME-ST31A-KIT 3 Channel Extender Kit TX RX for HDMI and USB C

The Atlona AT-OME-ST31A-KIT is an HDBaseT transmitter and receiver combination that delivers a complete integration solution with 4K video extension, automatic switching for the HDMI and USB-C inputs, and automatic display control. It includes the Omega™ Series AT-OME-ST31A three-input HDBaseT switcher and AT-OME-RX11 HDBaseT receiver. The OME-ST31A features audio de-embedding, mirrored HDMI and HDBaseT outputs, and selectable 4K downscaling to 1080p for the HDMI output. The OME-RX11 features a compact, low-profile enclosure that can easily be concealed behind a wall-mounted display or above a projector. This HDBaseT extender solution extends AV, Ethernet, and control up to 330 feet (100 meters) over category cable. Audio de–embedding is available at the transmitter and receiver

The transmitter is remotely powered by the receiver over HDBaseT. This makes the OME-ST31A-KIT ideal for applications in which the transmitter needs to be installed under a meeting table or in a lectern where local AC power may not be available..

Features:
3×1 HDBaseT switcher with HDMI and USB-C inputs

USB-C and two HDMI inputs
Immediate compatibility with laptops and tablets with USB-C ports supporting AV*
No need to provide USB-C to HDMI adapters
* USB-C port supports AV and device charging (with optional AT-PS-245-D4 power supply), but not USB data.
Video, audio, power, and data over category cable utilizing HDBaseT technology

Extends up to 330 feet (100 meters) @ 1080p with CAT5e/6 or 4K/UHD using CAT6a/7 cable
Uses easy-to-integrate category cable for low-cost, reliable system installation
4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling

Compatible with sources up to 4K/60 4:2:0 and 4K/30 4:4:4
Supports HDMI data rates up to 10 Gbps from PCs, media players, and Ultra HD Blu-ray players
HDMI and USB-C inputs, and HDMI output on the transmitter are compatible with 4K/60 4:4:4 and 4K HDR
HDCP 2.2 compliant

Adheres to latest specification for High-bandwidth Digital Content Protection
Allows protected content stream to pass between authenticated devices
Mirrored HDMI output at transmitter with selectable 4K to 1080p downscaling

Integrated video processing available on the HDMI output for automatic 4K/UHD @ 60, 30, or 24 Hz down-conversion to 1080p (based on connected display EDID). The downscaling can be bypassed for pass-through up to 4K/60 4:4:4 and 4K HDR.
Ideal for applications with a mix of 1080p and UHD sink devices, and when a 1080p confidence monitor is used in conjunction with 4K/UHD presentations
Transmitter powered by receiver over HDBaseT

Industry standard IEEE 802.3af PoE is supplied by the receiver over HDBaseT
Allows convenient under-table or furniture installation without the need for local AC power
Transmitter can also be locally powered by the optional AT-PS-245-D4 power supply – to charge a USB-C mobile device
Automatic display control

Automatically changes display power state based on active or standby mode of the switcher. Control signals to display are transmitted via IP, RS-232, or CEC.
Enables display and volume control. CEC enables control of consumer displays (as supported by the display manufacturer).
Includes an adjustable lamp cooldown mode to avoid prematurely powering up a projector after shutdown
Eliminates the need for a complex AV control system
Automatic input selection using hot plug detect and video detection technology

Selects active input when sources are connected or if there is a change in source power status
Enables simplified, automatic system operation without user intervention
Audio de-embedding at transmitter and receiver

De-embeds two channel PCM audio to a balanced, analog audio output
Deliver audio to an amplifier and speakers for sound reinforcement
Multi-channel audio compliant

Passes through multi-channel audio formats from the HDMI or USB-C inputs
Supports PCM, Dolby® Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS®Digital Surround™, DTS-HD Master Audio™, and DTS:X®
EDID management

Manages EDID communications with the source through a display’s EDID or internally stored EDID
Ensures desired audio formats and video resolutions are provided to the AV system
HDCP management

Automatically reports HDCP compliance status to the source based on the sink device
Allows non-protected material from PCs to pass to non-compliant displays, streaming devices, and teleconference systems; protected content is not transmitted
Displays a green splash screen as visual confirmation that protected content is being blocked from transmission to a non-compliant display
Integrated HDBaseT link status monitoring

Tests integrity of the HDBaseT cable link between the transmitter and the receiver
Web GUI provides real-time link status
Quick, easy verification or troubleshooting of RJ-45 termination or twisted pair cable quality
Intuitive GUI-based configuration using integrated web server (transmitter)

Offers menu-based configuration of device settings including network access, input switching, signal processing, display control, HDCP and EDID management, and more
Allows fast configuration of internal product settings and troubleshooting from a mobile device or PC in the field
TCP/IP and RS-232 control (transmitter)

Flexible control options for compatibility with Atlona Velocity™ and third-party control systems
Reduces integration time and costs
Easy to configure and manage with Velocity Device Manager – transmitter

Centralized, network-based configuration and management of Atlona IP-controllable products and systems
Manage configuration and firmware updates for AV devices spanning a facility, building, enterprise, or residence
Available as a free software download, or in complete Velocity control system components
Field-updatable firmware

Transmitter can be updated in the field via AMS or the web GUI
USB port on transmitter and receiver for firmware updates
Front panel power and signal status LEDs

LED indicators provide power, HDBaseT link, and input selection status information
Provides local, convenient setup and troubleshooting when network access is not available
Low-profile, 1 inch (25 mm) high enclosures

Easy installation into confined spaces below tables and in furniture, as well as behind displays and above projectors
Keeps devices out-of-sight when placed in public spaces
Included accessories

Installation guide
2 meter (6.5 foot) USB-C male-to-male cable (USB 3.1 Gen 1)
Surface mounting hardware
External universal power supply (for receiver)
Product Warranty