Ashly MXA1502 14 Channel 4 Zone DSP Power Mixer Amplifier Audio Processor

Ashly MXA1502 12 Channel 4 Zone DSP Power Mixer Amplifier Audio Processor

The mXa-1502 gives you multi-zone music distribution, paging, soundmasking and automatic mixing for a wide-range of environments. Process 12 audio inputs into four different areas of a church, restaurant, school or office/warehouse complex, etc., with a single rack space device that includes two Ashly-reliable 150-watt amplifiers capable of driving 2,4 and 8-ohm as well as 25, 70 and 100V loads. ALso get a rich compliment of digital signal processing, including routing, auto-mixing, ducking, amplifier status monitoring, event scheduling/triggering and more with Ashly AquaControl™ Software, that lets you navigate using virtually any browser-enabled device.
The mXa-1502 provides total control over four zones. For example: church sanctuary, balcony fill, crying room and foyer. Restaurant bar, main dining room, patio and waiting area. Reception, offices, conference room and warehouse. A big ballroom that gets partitioned into smaller spaces.

The 4-zone mXa-1502 has eight, Class A mic preamps with phantom power and four stereo line inputs for A/V
equipment. AquaControl software’s rich compliment of digital signal processing, including routing, auto-mixing, ducking, amplifier status monitoring, event scheduling/triggering and more makes the mXa-1502 a versatile problem solver.

Features:
8-balanced Mic/Line Inputs
Precision Class A mic preamp design with 48V phantom power
4 RCA-type Stereo Line Inputs
4 Outputs
2 x 150W Class D Amplifiers with selectable Multi-mode operation (2/4/8 Ohm + 25/70/100V)
Bridgable to deliver single-channel power of 300W at 4 or 8 ohms
Four convenient front-panel buttons for source/preset select
Scheduler and RTC (Real-Time Clock) allows user-defined automatic, timed activation of various operations
Generous integration I/O, including: Network, Serial, GPIO, VC, Standby & Fault (works with the WR-1, WR-1.1, WR-1.5, and WR-2 remotes)
Compact 1U design reduces rack space requirements
New, advanced Ashly AquaControl™ software allows easy and convenient access from many browser-based devices. No app to install! Comprehensive DSP includes:

Specifications:
Number of Input Channels 16 (8 Balanced Mic/Line, 4 Unbalanced Stereo Line)
Number of Output Channels 4 (2-Powered, 2-AUX Line)
Amplifier Power Output 2 X 150W @2/4/8 Ohms & 25/70/100V. 300W Bridged
Damping Factor >250 (8 Ohm load <1kHz)
Distortion (SMPTE, typical) <0.5%
Distortion (THD-N, typical) <0.5% (8 Ohms, 10dB below rated power, 20Hz–20kHz)
Channel Separation –75dB (dB from full output, 1kHz)
Signal-to-Noise (unweighted) >99dB (20Hz-20kHz, Gain@26dB)
Frequency Response 20Hz-20kHz, ±0.05dB
Balanced Input Connector Euroblock 3.5mm
Input Impedance 10k Ohms
Maximum Input Level +21dBu
Speaker Output Connector Euroblock 7.62mm
Nominal Voltage Input 100 – 240VAC
Operating Range 70 – 270VAC
Power Supply Type SMPS with active PFC
AC Mains Line Cord Connector Detachable Nema 5-15 for USA
Control Network RJ-45 connector, 1GB Ethernet
AUX Output Connector Balanced Euroblock 3.5mm
AUX Output Maximum Level +21dBu
Data Connection Euroblock 3.5mm – Gnd, +18V, Data Out, Data In
Fault Condition Logic Outputs Euroblock 3.5mm – fault indicated by loss of 1Hz “heartbeat” pulse signal
Remote DC Level Control Euroblock 3.5mm – Gnd, CV, V+ per input
Amplifier Protection Shorted output power limiting, over-temperature, DC-output, power-supply fault, mains-fuses & inrush-current limiting
Cooling Continuously variable temperature controlled fan
Unit Dimensions 19”W x 1.75”H x 14.54”D (483mm x 45mm x 369mm)
Dimensions 25.2”W x 2.5”H x 19.5”D / 641mm x 64mm x 495mm
Weight 13.0 lbs (5.4 kg)