Ashly MX-206 6 Channel Stereo Microphone Mixer Single Space Rackmount

Ashly MX-206 6 Channel Stereo Microphone Mixer Single Space Rackmount

The Ashly MX-206 single-space rack-mount mixer combines the features, reliability, and sonic performance you have come to expect from Ashly. This third generation mixer adds a universal 100-240VAC 50/60Hz power supply and a 3.5mm front panel stereo line input jack.

Other features include stereo, mono, and head- phone outputs, a 20dB input pad on each channel, switch- able +48V phantom power, up to 60dB of mic preamp gain (84 dB total), and concentric level and pan controls on each input channel.

Ultra low-noise summing amplifiers combine the channel signals for the main outputs. Two 5-segment LED arrays monitor stereo outputs. Stereo line level outputs on 1/4" connectors, a transformer isolated 600 ohm mono output on an XLR connector, and tape/CD inputs and outputs on RCA connectors come as standard equipment. Ashly still uses professional quality 16mm metal shaft potentiometers on all controls for greater accuracy and long life.

Features:
High Gain (84dB Channel Input to Program Output) Ensures Full Output with Low Level or Distant Mics
Transformer Isolated +24dBm 600 ohm Balanced XLR Mono Output
Pan Control on Each Channel
Auxillary Tape/CD Inputs and Outputs
+48V Phantom Power for Condenser Mics
Front Panel 3.5mm Stereo Line In Jack
Stereo Headphone Jack with Level Control
Safety/Compliance: cTUVus/CE, RoHS, FCC

Specifications:
Distortion, Hum and Noise
THD @ +20dBu, 20Hz–20kHz, input switch at -40dB: <0.05%
IMD (SMPTE) @ +20dBu, input switch at -40dB: <0.02%
Equivalent Input Hum and Noise (input switch -60dB): <-128dBu
Residual Output Noise, TRS Outputs (All Levels @ min): <-100dBu
Residual Output Noise, XLR Outputs: <-90dBu
Master Level at nominal, (All Ch. Level controls @ min): <-84dBu
Master Level and 1 Ch. Level at nominal: <-80dBu
Voltage Gain: (±2dB)
Mic Input to Master Output, 600 Ohm load: 84dB
Aux In to Master Output: 28dB
Frequency Response
20Hz–20kHz: +0/-0.5dB
Crosstalk
Between any inputs or outputs (20Hz–20kHz): <-60dB
Metering
VU Meters: Two 5-segment LED meters, 0VU = +4dBu
Peak Indicators: Peak Clip indicator on each input channel and L/R outputs, illuminates 3dB below clipping
Weights, Dimensions & Power
Dimensions: 19" W x 1.75" H x 9.4" D (483mm x 44mm x 239mm)
Unit Weight: 6.8lbs (3.9kg)
Shipping Weight: 11lbs (5kg)
Power Requirements: 100–240 VAC, 50–60Hz, 30W